Notices

How to remove crappy touch-up paint

Thread Tools
 
Old Feb 5, 2003 | 08:07 AM
  #1  
AadosX's Avatar
AadosX
Thread Starter
Senior Member
 
Joined: Oct 2002
Posts: 1,451
Likes: 0
From: Birmingham, AL
Default How to remove crappy touch-up paint

The person that had the car before me used some not-so-color-matched touch-up paint and it looks pretty bad... I want to go buy some from the Honda dealer that is the color of my car... is there a way to remove the old touch-up paint? Or do I have to go over the old paint...?

Thanks,
John
Reply
Old Feb 5, 2003 | 08:15 AM
  #2  
AccordSleeper's Avatar
AccordSleeper
Former H22 Accord Owner
 
Joined: Mar 2002
Posts: 1,839
Likes: 0
From: NH
Default

maybe some fine grit sandpaper on a pencil eraser.
Reply
Old Feb 5, 2003 | 08:45 AM
  #3  
dantastic's Avatar
dantastic
cx power!
 
Joined: Jun 2002
Posts: 2,435
Likes: 0
From: berkeley, ca --> la, ca representin' tha 510&626
Default

rubbing compound should do the trick.... use sparing tho, itll take off good clear coat
Reply
Old Feb 5, 2003 | 09:43 AM
  #4  
AccordSleeper's Avatar
AccordSleeper
Former H22 Accord Owner
 
Joined: Mar 2002
Posts: 1,839
Likes: 0
From: NH
Default

meguiers clay bar may do it
Reply
Old Feb 5, 2003 | 09:57 AM
  #5  
AcuraFanatic's Avatar
AcuraFanatic
Senior Member
 
Joined: Mar 2000
Posts: 37,274
Likes: 0
From: Southern NH
Default

Originally posted by AccordSleeper
meguiers clay bar may do it
Claybar won't. But the rubbing compound is a good idea.
Reply
Old Feb 5, 2003 | 12:31 PM
  #6  
AcsRcool's Avatar
AcsRcool
Faster than your Geo
 
Joined: Jun 2002
Posts: 821
Likes: 0
Default

if there is no clear coat over the paint, you can use lacquer thinner on it, it wont harm the clear coat of your car if used sparingly. Use a q-tip dipped in lacquer thinner and rub the bad paint out, then clean and sand the spot, prime it, sand it, paint it, sand it, paint it, sand it, clear coat it, sand it, should look quite nice =)
Reply
Old Feb 5, 2003 | 12:43 PM
  #7  
AcuraFanatic's Avatar
AcuraFanatic
Senior Member
 
Joined: Mar 2000
Posts: 37,274
Likes: 0
From: Southern NH
Default

Originally posted by AcsRcool
if there is no clear coat over the paint, you can use lacquer thinner on it, it wont harm the clear coat of your car if used sparingly. Use a q-tip dipped in lacquer thinner and rub the bad paint out, then clean and sand the spot, prime it, sand it, paint it, sand it, paint it, sand it, clear coat it, sand it, should look quite nice =)
Sounds easy enough.
Reply




All times are GMT -8. The time now is 02:22 PM.