APC fog lights I lost the wiring diagram
Thread Starter
5 speed
Joined: Sep 2002
Posts: 955
Likes: 0
From: NY, long island
APC fog lights I lost the wiring diagram
there are madd wires and i can't figure it out please help
i'll try to draw a picture of what it looks like
like where does the white go
i'll just take a pic rather
i'll try to draw a picture of what it looks like
like where does the white go
i'll just take a pic rather
Thread Starter
5 speed
Joined: Sep 2002
Posts: 955
Likes: 0
From: NY, long island
the white wire with the fuse seems to be what i want to hook to the positive
my last pair got fukced up so i thought it was the way i wired it so i don't want to **** these up even though they got a little burnt cause i just hooked them into the wiring from the other set
Registered User
Joined: Jan 2003
Posts: 33
Likes: 0
seee all them xtra wires
ther are alll BULLL****...
take the positive wires from the foglights connect that str8 to the switch and anothe wire from the switch str8 to the battery
then ground your foglights and BAM.:thumbup: ..your all set
your lights should be ready to work and go
ther are alll BULLL****...
take the positive wires from the foglights connect that str8 to the switch and anothe wire from the switch str8 to the battery
then ground your foglights and BAM.:thumbup: ..your all set
your lights should be ready to work and go
cx power!
Joined: Jun 2002
Posts: 2,435
Likes: 0
From: berkeley, ca --> la, ca representin' tha 510&626
in your photo, youve got it all right. the red wire should go to you parking lights (so the fogs are on only when you parking lights are on, and when your headlights are on so u dont forget them).
connect the other end of the red to the swtich where it sez supply volts. then connect the white wire, thats coming out of the relay to the red wire, to the switch where it sez on acc. then ground all the black wires with rings. ground the swtich too if you want it to light up
USE THE RELAY or else your switch will melt.
connect the other end of the red to the swtich where it sez supply volts. then connect the white wire, thats coming out of the relay to the red wire, to the switch where it sez on acc. then ground all the black wires with rings. ground the swtich too if you want it to light up
USE THE RELAY or else your switch will melt.
Faster than your Geo
Joined: Jun 2002
Posts: 821
Likes: 0
Originally posted by xxjustimajinxx
seee all them xtra wires
ther are alll BULLL****...
take the positive wires from the foglights connect that str8 to the switch and anothe wire from the switch str8 to the battery
then ground your foglights and BAM.:thumbup: ..your all set
your lights should be ready to work and go
seee all them xtra wires
ther are alll BULLL****...
take the positive wires from the foglights connect that str8 to the switch and anothe wire from the switch str8 to the battery
then ground your foglights and BAM.:thumbup: ..your all set
your lights should be ready to work and go
seriously, if you are gonna do it right, use the relay, one lead goes to the battery and another to ground. A third lead goes as power to your lights and the fourth lead goes to the switch. The switch has three prongs. One is ground (car chassis), one is power (any 12 volt source in your car will do, i would probably tap the cigarette lighter wire), and the last one connects to the relay like i said before. the lights connect to both the relay and to ground (car chassis). Don't be afraid man, its a simple circuit and hard to screw up too bad. You can find a diagram for what prong is what on the relay online, and your switch should include similar documentation, or you can just buy another one for 3 bucks. good luck man.
Registered User
Joined: Jan 2003
Posts: 33
Likes: 0
Originally posted by AcsRcool
Someone doesn't know how to use a relay. :fawk:
seriously, if you are gonna do it right, use the relay, one lead goes to the battery and another to ground. A third lead goes as power to your lights and the fourth lead goes to the switch. The switch has three prongs. One is ground (car chassis), one is power (any 12 volt source in your car will do, i would probably tap the cigarette lighter wire), and the last one connects to the relay like i said before. the lights connect to both the relay and to ground (car chassis). Don't be afraid man, its a simple circuit and hard to screw up too bad. You can find a diagram for what prong is what on the relay online, and your switch should include similar documentation, or you can just buy another one for 3 bucks. good luck man.
Someone doesn't know how to use a relay. :fawk:
seriously, if you are gonna do it right, use the relay, one lead goes to the battery and another to ground. A third lead goes as power to your lights and the fourth lead goes to the switch. The switch has three prongs. One is ground (car chassis), one is power (any 12 volt source in your car will do, i would probably tap the cigarette lighter wire), and the last one connects to the relay like i said before. the lights connect to both the relay and to ground (car chassis). Don't be afraid man, its a simple circuit and hard to screw up too bad. You can find a diagram for what prong is what on the relay online, and your switch should include similar documentation, or you can just buy another one for 3 bucks. good luck man.
seriously man yourself do u guys see a god damn relay in the pic of the diagram..what i said and what dantastic noticed in the digram are basically the same except i said hook it straight up to the battery..
peace out
Faster than your Geo
Joined: Jun 2002
Posts: 821
Likes: 0
Originally posted by xxjustimajinxx
:fawk: :fawk:
seriously man yourself do u guys see a god damn relay in the pic of the diagram..what i said and what dantastic noticed in the digram are basically the same except i said hook it straight up to the battery..
peace out
:fawk: :fawk:
seriously man yourself do u guys see a god damn relay in the pic of the diagram..what i said and what dantastic noticed in the digram are basically the same except i said hook it straight up to the battery..
peace out