Can any one tell me the best way to change out head and tail lights in a 2000 Honda accord 4dr 4cyl. Anything will help.

 

it should be an easy bolt on type work. take out grommets that holds the carpet and the light bolts should be exposed already

 

you will have to remove the front bumper for the headlights. What kind of head and tailights are u putting in?

 

^^^thay haven't changed that yet!!!! don't get me wrong, i love my honda's......but that design for the headlights is straight up...ARG:angry:

The tail light nut's should be like an 8 mm, that'll be a walk in the park compared to the headlight's lol

 

Bulbs is one things, the entire assembly is another. I've never worked on that year Accord, but I'd assume the above suggestion is correct for replacing a taillight assembly. For the bulbs you just need to remove the inner cover, self-explanatory when you get a look at it.

On some models (can't say for sure this applies to '00 Accords), ones on which people often suggest removing the bumper to replace headlight/front corner lamp bulbs, you actually only need to pull back the front fender-liner, it's even easier and faster than removing the bumper.
If you're replacing the entire headlight assembly, you should be able to figure it out by take a good, close look and determining which bolts need removed, etc.

If it's just the bulbs, the procedure is simple and is listed in the owner's manual.

 

^^^lol i'd hope he's only changing out the bulb's..I can speak from experience, that on my 5th gen......it is a pain removing the actuall assembly.....unless you'r gonna cut off the outside headlight mounting bracket......that bumper HAS to come off........i pray for you that honda changed that on the six gen!