Hello, i just got my aluminum bezel and i need some advice from ppl with this product. I have never installed any gauge related parts, so i need directions on taking out the cover of the dash so i can get access to the gauges. There seems to be 2 screws on the upper side of the dash. Is that all i take out? do i need to apply force? thanks. BTW, i have a 02 coupe.

 

do a search. there are plenty of threads.

 

it's for the indiglo's but removal is the same...

http://www.accordcompany.com/howto-indiglo.php

 

Um......i did search before posting this thread. There was no instructions on how to install them. I unscrewed the 2 screws and i cant take out the dash cover. The top part of the dash cover comes out but the bottom part is stuck. Anything i can do to take out the dash cover? What else do i need to take out to install the alumunum bezel? On the back of the bezel, should there be an adhesive or do i just lay the aluminum bezel over the stock one?

 

there should be adhesive on the back of the bezel. thers only 2 screws. you need to tug pretty hard to get it out. do it gently tho, and if you feel like something is gonna break, then stop and try pulling on a different section. that thing is a b1tch to getout.

 

i got the gauge bezel it was easy u just take out the top 2 screws and u gotta pull kinda hard to get the cover to pop off then u use the double sided tape to put it on its real easy.

here is a link to what mine looks like

http://community.webshots.com/rs2/1/...4mcbPRj_ph.jpg

 

Sorry I am a little late. Use super glue so it doesnt lift in cold weather.




MDX wheel & Aluminum Bezel

 

i like... i like....

what's better... that of carbon fiber?