I have found a f22b DOHC, what car is this out of?What are the specs?VTEC or no? I am thinking about getting this motor and building it up as apposed to an H22 Please help.
Thanks

 

got it from hondaswap.com

Displacement (cc): 2156
Power (bhp@rpm): 160@6000
Torque (ft/lbs@rpm): 148@5000
Compression Ratio: 9.2:1
Bore (mm): 85
Stroke (mm): 95
Cam Design: dohc
VTEC?: no
OBD: 1 or 2
Year(s) Produced: 1992-1996
In the following car(s): Honda Prelude Si

 

I have that engine...and turbo too...

 

How was it pre-turbo?

 

A lot better over my stock EX motor...but then I went from auto--->manual and therefore a lot more responsive when downshifting to pick up speed...but a nice motor and cheap...

 

so was it worth it?

 

yea...it was...but then again i thot my car was slow and wanted something to give it more speed...so f22b, auto to manual, and turbo...=D...

 

What does the swap include? Tranny , ECU ect?

 

Hmm, well what does a F22 engine, manuel trans and ecu cost$
Has anyone priced it against the H23a1?

Displacement (cc): 2258
Power (bhp@rpm): 160@5800
Torque (ft/lbs@rpm): 156@4500
Compression Ratio: 9.8:1
Bore (mm): 87
Stroke (mm): 95
Cam Design: dohc
VTEC?: no
OBD: 1 or 2
Year(s) Produced: 1992-1996
In the following car(s): Honda Prelude SE/Si

Looks to me like the power curve is a little more to my liking with the H23a1, but not if it's allot more money than a F22.

 

F22B, F22B tranny, ECU...should not run more than $1000...I have never looked into the H23...so I don't know the cost difference there...

I spent $4000 total on my setup, included custom turbo setup, stand alone fuel mgmt, F22B, tranny, ecu, all parts for auto--->manual and labor...