i need help doin the tv in the radio din and relocting the stero to the cig tray. and
#1
Senior Member
Thread Starter
Join Date: Jun 2002
Location: toledo ohio
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
i need help doin the tv in the radio din and relocting the stero to the cig tray. and
i need help doin the tv in the radio din and relocting the stero to the cig tray. and outl let.
i know a few of you did it. so how do i do it?
i know a few of you did it. so how do i do it?
#2
You need some time , It takes a while to do , and skills with bondo are a must. Make sure that you fiberglass the screen in so that the bondo will not crack. The HU is pretty easy you just have to cut t all out and then it is a perfect DIN hole. A little tip for you , use SEM vinyl dye for you paint it is great dryes fast and does not chip because it is a dye. And for the fial coat hold the can about 12'' away and you get a good texture and it make it look like a factory panel.
Good luck.
Good luck.
#4
i've seen 7 inch screen setups fit almost perfectly.. it all depends on the screen housing..
my 5.6inch screen fits alright.. but with a little modifications.. you just dremel out the ashtray and cig lighter part.. remember to do it little by little or else you'll make the hole too big.
my 5.6inch screen fits alright.. but with a little modifications.. you just dremel out the ashtray and cig lighter part.. remember to do it little by little or else you'll make the hole too big.
#6
kool, i was thinking of doing something similar to that, any 1 has a pic???
1 indash 7" TV Screen
1 DVD Player
1 Equalizer
1 Power Inverter
that'll take up more space
1 indash 7" TV Screen
1 DVD Player
1 Equalizer
1 Power Inverter
that'll take up more space
#8
you dont need bondo if your HU has a piece that goes over the edges.
just be patient when cutting out the bottom, it took me 1.5 hours to do it all correctly. It sucks that the TV I got didn't work though, csue I got this hole there and no TV.
just be patient when cutting out the bottom, it took me 1.5 hours to do it all correctly. It sucks that the TV I got didn't work though, csue I got this hole there and no TV.
#10
anymore pics 95acc??
and whats ur audio setup?
im thinking of either getting an indash lcd or doing a project like what u did..
another question...what kinda monitor is that?
and do u have any specs of it? resolution?
looks good
and whats ur audio setup?
im thinking of either getting an indash lcd or doing a project like what u did..
another question...what kinda monitor is that?
and do u have any specs of it? resolution?
looks good