Rebuilding a 2000 Accord Power Steering Pump
#1
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Albuquerque
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Rebuilding a 2000 Accord Power Steering Pump
I am looking for information on rebuilding the Power Steering Pump on a 2000 Accord SE (4 cylinder). Have all of the parts but no instructions. May have to wing it if I get no replys. If anyone has tackled this, it sure would be helpful.
Thanks,
Jack in Albuquerque, NM
Thanks,
Jack in Albuquerque, NM
#2
Wing it just go slow and lube all your new seals with power steering fluid so thy do not rip.
If you are rebuilding it because it blew up flush the system take the suck hose for the pump put it in a bucket of new fluid take the return hose from the reservoir empty all the old fluid in a norther bucket. Make sure and turn the wheel a few time to help clean out the rack.
If you are rebuilding it because it blew up flush the system take the suck hose for the pump put it in a bucket of new fluid take the return hose from the reservoir empty all the old fluid in a norther bucket. Make sure and turn the wheel a few time to help clean out the rack.