Problems With My New Starter
03-19-2008, 11:22 AM
#1
Junior Member
Thread Starter
Join Date: Mar 2008
Location: columbia
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Problems With My New Starter
having a problem with my NEW starter i think when i tried to start it it turnsover slowly and then when i tried to do it again it wont turn over at all...so i kept on tryin still no start...so i attached a cable wire to my friends to mine and i tried to start it the start cranked over slowly but a little then stopped so i tried it again and it wont turnover again...any answers?
03-19-2008, 03:18 PM
#3
Senior Member
Join Date: Oct 2003
Location: Buffalo, NY
Posts: 875
Likes: 0
Received 0 Likes
on
0 Posts
Check the battery voltage with a meter.
If the voltage is around 12V, then recheck the wires at the terminals and the big wire on the starter to be sure they are clean and tight. Make sure the small wire is attched firmly, but if it tries to turn over, that one sounds like it's on there.
If the voltage is around 12V, then recheck the wires at the terminals and the big wire on the starter to be sure they are clean and tight. Make sure the small wire is attched firmly, but if it tries to turn over, that one sounds like it's on there.