When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
follow these instructions.
also will be a good idea to get the head shaved while its out. (get it shaved 5mm) and make it high compression. get some xtra horses.
Not recomended to shave the head on a high milage 95' unless you are willing to drop some denero to beef up the bottom end first. You'll be waisting your money and time. Believe me everything will come out the bottom through the oil pan the first time you wind it up tight!!!
follow these instructions.
also will be a good idea to get the head shaved while its out. (get it shaved 5mm) and make it high compression. get some xtra horses.
5mm = .20inch there isnt enough on the head to be milled that much :lmao:
hey guys i searched high and low for a write up but could'nt find one. Does anyone have one?
Its called buying a repair manual for yourself or looking for a free one online. :dunno:
A head gasket job is not too difficult, but not something an amateur should attempt.