Notices

H23??? Stage 2 Cams??? Help????

Thread Tools
 
Old Jul 19, 2007 | 09:10 PM
  #1  
akord_king's Avatar
akord_king
Thread Starter
Junior Member
 
Joined: Oct 2006
Posts: 14
Likes: 0
Default H23??? Stage 2 Cams??? Help????

ok i did some research and is the only difference between the h22a and h23 the vtec cams on the h22a? because i was going to buy a h22a but i was going to put stage 2 cams in it but that would defeat the purpose of buying the h22a over the h23 if im going to buy stage 2 cams i would be better off getting the h23 (cheaper) and would end up with more hp then an stock h22a correct????
Reply
Old Jul 19, 2007 | 09:44 PM
  #2  
wedley2's Avatar
wedley2
bboy Wesley West
 
Joined: Oct 2003
Posts: 15,390
Likes: 0
From: six-five-o
Default

an h22 with valvetrain and good bolt ons should get you over or close to 200whp.
Reply
Old Jul 28, 2007 | 12:09 PM
  #3  
akord_king's Avatar
akord_king
Thread Starter
Junior Member
 
Joined: Oct 2006
Posts: 14
Likes: 0
Default

the h22a comes stock with 200hp with no upgrades, bolt ons and vavltrain on an h22a should get it up to 250 or higher
Reply
Old Jul 29, 2007 | 03:39 PM
  #4  
wedley2's Avatar
wedley2
bboy Wesley West
 
Joined: Oct 2003
Posts: 15,390
Likes: 0
From: six-five-o
Default

i meant whp, 200hp stock is at the crank
Reply
Old Jul 29, 2007 | 06:58 PM
  #5  
Snoopy's Avatar
Snoopy
been there done that
 
Joined: Jun 2002
Posts: 30,637
Likes: 0
From: 916
Default

Originally Posted by akord_king
the h22a comes stock with 200hp with no upgrades, bolt ons and vavltrain on an h22a should get it up to 250 or higher
you wish

Originally Posted by wedley2
i meant whp, 200hp stock is at the crank
yes
Reply




All times are GMT -8. The time now is 03:18 PM.