im currently putting the wiring harness from the accord onto the lude engine...

It turns out my F22B3 engine didnt come with a EGR solenoid so there aint a plug for it....

Basically ill have to take the Ludes plug and run a new wire for it to the ECU along side with the VTEC and IAT sensors...

Getting the pictures developed soon gotta post them up soon...


Right now gotta get a Belt that will fit the crank/Air Cond/ps pump


THe swap guide says 43'' im in australia, so i dunno what that converts to... THe Mitsubishi belt they use on the Lude is a P10 and the Accord one is a P30 i figured that i would need a P25 or P20 to get it to fit properly any ideas?

A Part number for the Belt you guys got would be really helpful i.e from NAPA so i can search it on the web and get its length...

Also has anyone got the belt from the company called Gates? if so a part number would also be helpful

 

Looks like i found the belt part number using napaonline and gates...

its actually a 43 1/8'' length

 

i ended up just getting a string and wrapping it around the pulleys...measured it, went into the parts store and asked for the one i needed....by size and # of ribs on the belt.