Notices

Shifting/Redline problems with JDM H22

Thread Tools
 
Old Nov 26, 2006 | 12:09 AM
  #1  
93_Accord_SE's Avatar
93_Accord_SE
Thread Starter
Member
 
Joined: Nov 2006
Posts: 55
Likes: 0
Default Shifting/Redline problems with JDM H22

Hey guys,
I don't know if this ever happen to any of you guys but my motor isn't shifting correctly in 4th gear and the redline isn't right either. What I have is a jdm h22a w/ auto tranny in my 93 Accord SE. I have everything replaced w/ the jdm h22a ecu along with the tcu. And yea I do have the same problem as everyone else does, "I can't shift out of park"...so I'm still in the process of trying to get that solve too. Well, here's my story, Supposely my motor shift at 30 mph into 4th gear and the redline is at 7200 rpm, that's with the h22a tcu. Now, my car is shifting "on and off" into 4th gear at 30 mph and 38 mph and my redline is stuck at the Accord's 6300 rpm. I don't know if my tcu is mess up or some other things is bad. Does anyone have any ideas on what's going on here?
Reply
Old Dec 14, 2006 | 12:56 PM
  #2  
93_Accord_SE's Avatar
93_Accord_SE
Thread Starter
Member
 
Joined: Nov 2006
Posts: 55
Likes: 0
Default

Well, I got my "shifting out of park" fixed, thanks to fuse. About my shifting/redline problems, I bought another h22a TCU and it still does the same thing. I just hope my tranny isn't mess up or could it be my ECU? Damn! I'm getting too much headache wit this, probably going to sell the car.
Reply
Old Dec 14, 2006 | 01:12 PM
  #3  
F22B Prelude's Avatar
F22B Prelude
Rachel Bilson
 
Joined: Oct 2005
Posts: 11,230
Likes: 0
From: South Bend/Walkerton, Ind
Default

Whats the redline at now?
Reply
Old Dec 14, 2006 | 01:25 PM
  #4  
93_Accord_SE's Avatar
93_Accord_SE
Thread Starter
Member
 
Joined: Nov 2006
Posts: 55
Likes: 0
Default

Its stuck at 6300rpm(Accord's redline). My TCU(H22a) was working great at 7200rpm until something happen, don't know what.
Reply
Old Dec 14, 2006 | 01:29 PM
  #5  
F22B Prelude's Avatar
F22B Prelude
Rachel Bilson
 
Joined: Oct 2005
Posts: 11,230
Likes: 0
From: South Bend/Walkerton, Ind
Default

What transmission? Accords or the Ludes
Reply
Old Dec 14, 2006 | 04:22 PM
  #6  
93_Accord_SE's Avatar
93_Accord_SE
Thread Starter
Member
 
Joined: Nov 2006
Posts: 55
Likes: 0
Default

The motor, tranny, ecu, & tcu is all the Prelude H22a.
Reply
Old Mar 8, 2007 | 07:24 PM
  #7  
waaBAAH's Avatar
waaBAAH
Senior Member
 
Joined: Dec 2005
Posts: 577
Likes: 0
From: Racine, Wisconsin
Default

is your motor actual going that high?? it sounds like an electrical issue with either gauges, dizzy, ecu. from what i am reading there is no possible way to be in fourth gear and such a high redline. a tranny will not do that (unless you are in second gear but i highly doubt that)
Reply
Old Mar 9, 2007 | 03:53 PM
  #8  
TheImportsRacer's Avatar
TheImportsRacer
internet hax0r elite
 
Joined: Mar 2007
Posts: 29
Likes: 0
From: satx
Default

if youre using the h22a tranny, your redline should be 7800 or so. i know my h22a w/ h23 tranny has a redline of 7800. sounds like your gague cluster might be borked, or you have an electrical problem somewhere leading up to your gague cluster...
Reply
Old Mar 9, 2007 | 06:29 PM
  #9  
Fuse's Avatar
Fuse
Senior Member
 
Joined: Oct 2006
Posts: 1,335
Likes: 1
Default

LOL how are you man still fighting it.I will take another look into it hope i can find something i missed last time.I never liked working with autos just swap to a manual lol.Dont sell it

Give me a couple of days on my off time i will look it over again.

Last edited by Fuse; Mar 9, 2007 at 06:39 PM.
Reply
Old Aug 20, 2007 | 06:26 PM
  #10  
93_Accord_SE's Avatar
93_Accord_SE
Thread Starter
Member
 
Joined: Nov 2006
Posts: 55
Likes: 0
Default

Hey fuse,
how's everything going for you man? Well, to this date, I haven't figure out anything to solve my problem yet. I got tired messing around with it. So any new ideas for me lately? Later man!
Reply



All times are GMT -8. The time now is 09:19 PM.