Hi everyone, I wanted to see if anyone here could direct me to some information on what steps need to be taken to remove the springs and shocks from a 6th gen coupe. I know that the coil springs need to be compressed and the nuts from the shock towers removed but other than that I'm a little lost. I know that it can't be a complete teardown because I'm just going to be replacing the stock shocks and springs with lowering springs and new shocks. Anyone have an idea to where I can find more information and possibly some pictures so I don't get lost? I've done this before but it was with my Ranger, and that's when I replaced the Ibeams with lowering Ibeams and did the flip kit, so I know a little when it comes to suspension work, but the Accord is a little mysterious to me at this point. Any suggestions would greatly help me out, Thanks!