Notices

Front Rotors change in 97 accord easy?

Thread Tools
 
Old Oct 25, 2006 | 07:44 AM
  #1  
mystikalxxtasy's Avatar
mystikalxxtasy
Thread Starter
Member
 
Joined: Aug 2002
Posts: 75
Likes: 0
Default Front Rotors change in 97 accord easy?

i got 97 accord lx how easy its to replace the front rotors?

my brake pads are fine now.. is it recommended to change them out when replacing the rotors?

also do the rotors just pop out after removing the 4 bolts and removing the calipers?
Reply
Old Oct 25, 2006 | 08:52 AM
  #2  
mycb7com's Avatar
mycb7com
Senior Member
 
Joined: Oct 2006
Posts: 202
Likes: 0
From: Washington State
Default

I think you have to tap the rotor off the axle, may be more difficult than just 4 bolts.
Reply
Old Oct 25, 2006 | 09:43 AM
  #3  
mystikalxxtasy's Avatar
mystikalxxtasy
Thread Starter
Member
 
Joined: Aug 2002
Posts: 75
Likes: 0
Default

can someone confirm this.. before i do something myself and regret it...


thx
Reply
Old Oct 25, 2006 | 10:32 AM
  #4  
OurStory's Avatar
OurStory
Junior Member
 
Joined: Sep 2006
Posts: 23
Likes: 0
From: Toronto
Default

Originally Posted by mystikalxxtasy
i got 97 accord lx how easy its to replace the front rotors?

my brake pads are fine now.. is it recommended to change them out when replacing the rotors?

also do the rotors just pop out after removing the 4 bolts and removing the calipers?
Isnt the front discs? Anyways I changed mines and it was vary hard to remove. All the accords are hard to take off the front discs till 98 I think. You have to use this special took and pull it out. Alot of shops will charge you alot for labor and I suggest you take it to a shop because if you cant get it out, you will have to call a toetruck.
Reply
Old Oct 25, 2006 | 01:06 PM
  #5  
mystikalxxtasy's Avatar
mystikalxxtasy
Thread Starter
Member
 
Joined: Aug 2002
Posts: 75
Likes: 0
Default

les schwab is charging me $163.90 to just change the front rotors no brakes...

for everything should i just do it there?
Reply
Old Oct 25, 2006 | 06:30 PM
  #6  
simplyredvw's Avatar
simplyredvw
Member
 
Joined: May 2006
Posts: 255
Likes: 0
From: Texas
Default

Originally Posted by mystikalxxtasy
do the rotors just pop out after removing the 4 bolts and removing the calipers?

You have to remove more than those 4 bolts to get the rotor off of the car. May not be easy if you're not mechanically inclined and have access to some tools.
Reply
Old Oct 25, 2006 | 09:00 PM
  #7  
stereo's Avatar
stereo
Senior Member
 
Joined: Jul 2004
Posts: 901
Likes: 1
From: CA
Default

the rotors are pressed on so you will need to press them off it's a pain and not for beginners or you might end up with a undriveable car.

Last edited by stereo; Oct 25, 2006 at 09:02 PM.
Reply
Old Oct 26, 2006 | 07:06 AM
  #8  
Fuse's Avatar
Fuse
Senior Member
 
Joined: Oct 2006
Posts: 1,335
Likes: 1
Default

the rotors are held in by the hub.the hub is pressed on so no its not easy at all take it to a shop.
Reply
Old Oct 27, 2006 | 08:28 PM
  #9  
sleezye's Avatar
sleezye
Junior Member
 
Joined: Jul 2005
Posts: 83
Likes: 0
Default

i thought the rotors were held on to the hub by the wheel bearing which has four bolts in it but what do i know not bad to do on a lift with a air hammer
Reply
Old Oct 27, 2006 | 08:31 PM
  #10  
Fuse's Avatar
Fuse
Senior Member
 
Joined: Oct 2006
Posts: 1,335
Likes: 1
Default

thy make a special plate you can hit instead its still a pain in the ass
Reply



All times are GMT -8. The time now is 08:12 PM.