EGR Question
Thread Starter
Member
Joined: Sep 2006
Posts: 67
Likes: 0
From: SW Florida
EGR Question
The EGR system on my Accord does not seem to work properly. Is there a way to tell if the problem is the EGR VALVE itself or the EGR VACUUM SOLENOID in the control box? Please advise.
Last edited by gulfview; Oct 23, 2006 at 04:01 PM.
Senior Member
Joined: Oct 2006
Posts: 1,335
Likes: 1
any codes.you could test the solenoid you will need a vac pump it should hold vacuum off.the 3 wires to that egr are just the lift sensors.the 2 wires running to the egr vacuum solenoid are the activators one hot one ground so one wire should be hot and the other is controlled by the ecm.you could also see it you got vacuum to the egr with the solenoid unplugged you should not.
Last edited by Fuse; Oct 23, 2006 at 05:14 PM.