The wheel studs on my '91 Accord are shot. I understand the rotors need to be pressed out on these cars and it seems I will have to do this to change the studs. How much does a machine shop get to do this and since I cant drive the car, what is required to be disassembled to have this done. Also, do I have to go to a full blown machine shop or do some automotive shops have the required press for the job. Thanks

 

a look at this rotor write up might help:
http://www.cb7tuner.com/vbb/showthre...ghlight=rotors
later.

 

i dunno how diff the '91 is....but with my '95 i thought the same thing...but upon closer inspection, i noticed that there's some space on the inner side where the studs can go through one at a time. i just had to move the brake caliper out of the way. hope that helps

 

Yea, I actually realized that myself after only removing the caliper. I came back to update the post when I saw your comment. Im glad I did and didnt go through all that shit and then see your post. That would have sucked.