Switching Ignition Cylinder
Thread Starter
Member
Joined: Jan 2006
Posts: 74
Likes: 0
From: newark new jersey
Switching Ignition Cylinder
hey wats up i have a 91 accord dx and i wanna change the ignition cylinder cuz i lost my key, i bought a new one but idk how to take the old one out, plz give me details on how to cuz i really need this done.
Senior Member
Joined: Jul 2004
Posts: 901
Likes: 1
From: CA
could have just ordered a new key cut from the vin # or the code on the door or trunk lock cylinder if you must replace the ignition lock assembly you have to take off the breakaway screws with a punch or drill them out
Senior Member
Joined: Jul 2004
Posts: 901
Likes: 1
From: CA
??? about ordering a new key or replaceing the lock assembly? if you pull the colum cover off you will see 2 bolts with no head you drill them out and install the new one and tighten the 8mm bolt until the head breaks off .
Senior Member
Joined: Jul 2004
Posts: 901
Likes: 1
From: CA
if you pull the black colum cover and look behind the turn siginal switch the 2 round things holding the bracket with no heads on it . if you have a brend new complete lock assemble you will see the heads on it still.