Changing sensitivity on Python 1500 ESP
09-15-2002, 01:23 PM
#1
Member
Thread Starter
Join Date: Jun 2002
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Changing sensitivity on Python 1500 ESP
Does anyone know how I can change the sensitivity on my python alarm? The alarm itself comes with instructions but does not tell how to change the sensitivity and other options. Thanks
09-15-2002, 03:10 PM
#2
Junior Member
Join Date: Sep 2002
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
find the shock sensor and turn the knob to the left on it or actually in it. the shock sensor should be seperate from the alarm but still attached by a plug. dependind on which model u have it might just be knob on the brain and not seperat at all
09-15-2002, 05:39 PM
#3
Member
Thread Starter
Join Date: Jun 2002
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
btw, is there a way I can change the duration of the alarm from 30 to 60 seconds without using the computer that is supposed to configure the alarm? Such as using the valet switch and remote.
09-16-2002, 05:03 AM
#4
Junior Member
Join Date: Sep 2002
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
yeah u can, u have to program it with the vale switch. the maanual tells u that . key in th on position, select the correct zone with the valley. if it is zone 4 u want press the valle switch 4 times and then hold it in a fitth and dont let go, then use the key pad to select feature 1 or 2 ( lock and unlock). the manual tells u exactly what zone is which. if all fails go to a circuitcity and most likely u gotta pay, the'll use the bitwriter to program it.