new to HAN. question about coilover.
Thread Starter
Registered User
Joined: Nov 2005
Posts: 16
Likes: 0
new to HAN. my rides pictures
new to this forum,say hi to every one.
and attach a pic of my car, just got 18"installed do u guys think i need more drop? im on H&R sports right now.
i am thinking of getting coilovers, tei basic /SS.
i will do a 2" drop after the coilover, my question is do i need camber kit?
some ppl told me i don't need one, some ppl told i do need one, so will same car with the same coilover and the same drop produce different camber reading? one person told me he has basic, and 2"drop all around, his camber is oly -1.25, with in spec. please help me.
thanx for any help.
jack
and attach a pic of my car, just got 18"installed do u guys think i need more drop? im on H&R sports right now.
i am thinking of getting coilovers, tei basic /SS.
i will do a 2" drop after the coilover, my question is do i need camber kit?
some ppl told me i don't need one, some ppl told i do need one, so will same car with the same coilover and the same drop produce different camber reading? one person told me he has basic, and 2"drop all around, his camber is oly -1.25, with in spec. please help me.
thanx for any help.
jack
Last edited by yaguan; Nov 17, 2005 at 01:37 PM. Reason: change topic
7th Gen Coupe V6
Joined: Jun 2005
Posts: 928
Likes: 1
From: The Sin City
Welcome to HAN and nice car.
I dont think you need a drop, The wheel gap looks good in the picture but that could be just the picture. How much wheel gap do you have BTW.
Edit: I think you will need a camber kit if you do a 2 inches drop.
I dont think you need a drop, The wheel gap looks good in the picture but that could be just the picture. How much wheel gap do you have BTW.
Edit: I think you will need a camber kit if you do a 2 inches drop.
Thread Starter
Registered User
Joined: Nov 2005
Posts: 16
Likes: 0
after 4 hours clay bar, polish, wax job done, finally made the car clean again. here are some better pictures.
right side view
the gap about 3fingers
reflection of the hood.
left side view
trunk. note the cheap rear bumper paint job...
side. from gap is bigger than the rear, may be that's because i have amps
and sub on the rear, or maybe the rear shocks are gone?
rear left view. the - camber
8000k SLC hid kit in oem hosing. ganna buy TYC and retrofit s2k projectors
need money.
output, not bad campare than one of my friend's ebay halogen projector.
please tell me what do u think about my next move is. thank you.
right side view
the gap about 3fingers
reflection of the hood.
left side view
trunk. note the cheap rear bumper paint job...
side. from gap is bigger than the rear, may be that's because i have amps
and sub on the rear, or maybe the rear shocks are gone?
rear left view. the - camber
8000k SLC hid kit in oem hosing. ganna buy TYC and retrofit s2k projectors
need money.
output, not bad campare than one of my friend's ebay halogen projector.
please tell me what do u think about my next move is. thank you.
X-Moder8er
Joined: Feb 2000
Posts: 1,013
Likes: 0
From: Sesame Street
Looks good with those Volks.... 
As for a camber kit, if you go to a 2" drop, you should get a camber kit ONLY if your rims will allow it. What i mean is that if your srims stick out too much (depending on the offset), a camber kit will cause them to straighten out and possibly rub.
As for a camber kit, if you go to a 2" drop, you should get a camber kit ONLY if your rims will allow it. What i mean is that if your srims stick out too much (depending on the offset), a camber kit will cause them to straighten out and possibly rub.
