Foglight Question
#1
7th Gen Coupe V6
Thread Starter
Foglight Question
Last night I installed foglights on my car according to the instructions. They look great on the car but they only work when you turn on the Headlight. If you turn off the headlight they will turn off as well.
What I want to know that is there anyway I can change this
to this
So that on both clicks, they come one and go off only when everything is off.
Here is the circuit diagram btw, I realy dont know how to read it.
Just want to know if there is a way to do it, I will post some pictures tommorow.
What I want to know that is there anyway I can change this
to this
So that on both clicks, they come one and go off only when everything is off.
Here is the circuit diagram btw, I realy dont know how to read it.
Just want to know if there is a way to do it, I will post some pictures tommorow.
#2
DIY Fog Lights w| Parking Lights Mod
You need to get access to the rear of the fog light switch.
6th gen instructions....
Cut the BLUE wire behind the switch (leave some slack at the switch side)
Splice into the RED/BLACK wire (dont cut it, strip some insulation off)
Strip and Attach the BLUE wire(switch side) to the RED/BLACK wire.
Use electrical tape or whatever to seal the connections. Dont forget to cover the open BLUE wire
Reassemble.
How it Works...
The blue wire recieves power from Red/Green which trips the relay to turn on the lights.
Red/Green is hot whenever your headlights are on.
Red/Black is hot whenever your headlights OR parking lites are on.
Cutting the blue wire on the switch and attaching it to Red/Black will let you run the lights with the parking lights or headlights.... (and will also bypass the relay that turns them off when your Highs are on)
Note: I will not be responsibe for your f*ck ups.
This info had been compiled from various sources
I havent done this mod on my car, since i do not have fogs,
but this has worked for others, and it should work for you
6th gen instructions....
Remove the coin holder tray.
There are two screws where the coin holder sits... remove them
The little dash panel should come loose and can be taken out easily
giving you access to the rear of the switch
Rough Image
7th gen instructions....There are two screws where the coin holder sits... remove them
The little dash panel should come loose and can be taken out easily
giving you access to the rear of the switch
Rough Image
if shonnv or anyone attemps this with a 7th gen, please post back with your instructions and i can put them all together
Rough image to remove lower cover for switch access?
You should see 5 wires coming from the fog light switch connection.Rough image to remove lower cover for switch access?
Cut the BLUE wire behind the switch (leave some slack at the switch side)
Splice into the RED/BLACK wire (dont cut it, strip some insulation off)
Strip and Attach the BLUE wire(switch side) to the RED/BLACK wire.
Use electrical tape or whatever to seal the connections. Dont forget to cover the open BLUE wire
Reassemble.
How it Works...
The blue wire recieves power from Red/Green which trips the relay to turn on the lights.
Red/Green is hot whenever your headlights are on.
Red/Black is hot whenever your headlights OR parking lites are on.
Cutting the blue wire on the switch and attaching it to Red/Black will let you run the lights with the parking lights or headlights.... (and will also bypass the relay that turns them off when your Highs are on)
Note: I will not be responsibe for your f*ck ups.
This info had been compiled from various sources
I havent done this mod on my car, since i do not have fogs,
but this has worked for others, and it should work for you
#3
7th Gen Coupe V6
Thread Starter
Awsome! Thanks for that info, I will try that tommorow and let everyone know if it works..
Edit: The instructions you posted to remove the lower dash are absolutely right. will do the transplant later on today.
Edit: The instructions you posted to remove the lower dash are absolutely right. will do the transplant later on today.
#6
7th Gen Coupe V6
Thread Starter
Originally Posted by simsurfer
Im sure that plate you got is illegal...there are no numbers or letters on it
:-)
:-)
the plate has numbers, I erased them with photoshop just to be safe.
#7
Cut the white green and red/green and connect to switched (so they wont be left on when you park) 12v fuse or better yet parking light wire after switch.. Federal law requires the OEM setup, but FOgs are best by themselves (with parking lights on too). Had to make similar mod on Expedition Fogs. In poor (snow white out condition) the headlights blind you, but the low fogs guide the way.
#8
7th Gen Coupe V6
Thread Starter
Originally Posted by 05CoupeLXSE
Cut the white green and red/green and connect to switched (so they wont be left on when you park) 12v fuse or better yet parking light wire after switch.. Federal law requires the OEM setup, but FOgs are best by themselves (with parking lights on too). Had to make similar mod on Expedition Fogs. In poor (snow white out condition) the headlights blind you, but the low fogs guide the way.
Red/Green, White Green or Blue????? can you please be more specific. Thanks
#9
Follow what i posted... (it worked for other people on another accord forum)
from pic with the entire schematic, the blue wire recieves power from Red/Green which trips the relay to turn on the lights.
Red/Green is hot whenever your headlights are on.
Red/Black is hot whenever your headlights OR parking lites are on.
Cutting the blue wire on the switch and attaching it to Red/Black will let you run the lights with the parking lights or headlights.... (and will also bypass the relay that turns them off when your Highs are on)
from pic with the entire schematic, the blue wire recieves power from Red/Green which trips the relay to turn on the lights.
Red/Green is hot whenever your headlights are on.
Red/Black is hot whenever your headlights OR parking lites are on.
Cutting the blue wire on the switch and attaching it to Red/Black will let you run the lights with the parking lights or headlights.... (and will also bypass the relay that turns them off when your Highs are on)