Do you see the teeth at the bottom of the part I pictued earlier, the tray?

Below the 12V outlet are some teeth with holes. In my car whatever they screwed into must be gone :dunno:

Please help me fix this hack-job and restore this stuff to stock!

 

To install the lower cubby (black) you will need to remove the wood grain console cover, remove the AT shifter trim ring first to do so.

The black cubby will screw in under the console cover, the 3 tabs at the back fit into 3 holes in the back of the cubby area as part of the console.

Don't forget to plug in the lighter port.

The upper cubby cover (tan or grey) should jusk clip into factory tangs in the cubby roof.

Else you can't expect us to know how to fix the mess in your car, that's a real CF.

 

Mr Chad hit it ...

. Install the cigratte lighter
. Install the lower cubby portion that you have.
. There's a cubby roof that clips onto the underside of the radio console

The end?





On a stock 6th gen, this is what the upper cubby hole looks like:



It looks like you have this strapped on there though (it's a bit hard to tell)

EX Audio Attachment Kit


That extra DIN should come right off. I'm not sure how much drilling or cutting was used to mount it, but you might have some unforseen cuts in your lower dash.

 

I'm not actually doing the work. I'm taking it back to the guy who did the work for me.

I'm just trying to get ALL the parts necessary to give to him.

So the only two parts I need is the part I have now, and the "Front COnsole Lower Cover"?

 

kenton, u sold ur car? got any mods for sale, let me know... sad to see u go

 

I put the DC header and GReddy Evo2 on eBay.

The DC header was cracked (view the pictures at www.kenton.org/ebay/parts it's the dc1.JPG-dc?.JPG) like you were afraid of. We didn't even know until we popped the header off the car. It split on the 1st and 4th cyl pipes that create the "2" in 4-2-1. I got $100 shipped for it on eBay

The GReddy I got $300 shipped for. I got ripped off, but what else am I going to do with it?

I still have the AEM Intake and Helix on the car. I'm just going to leave the Helix on because it'll be a bitch to remove and it's non-colored so no one will know.

But yeah, I sold my car for $5,000. I took a bit of a $1000-1500 loss hit compared to KBB, but I was DESPERATE to get this car gone. I've beat the shit out of it for far too long!

The only things not stock is the dash and I ordered the part today and my guy is going to put all that back to stock for me. I got a factory 6 CD deck off eBay for $100 that i'm putting in there. Going to sell that little 7" TV and my Panasonic touchscreen on eBay of course.

I'm not going anywhere though, I love HAN and I'm fairly knowledgable in 6thG Accords so I'm sticking around. I read ClubRSX and K20A.org now, but HAN is my home

It's nice to know I've made friends in the Accord forum this past year and a half

 

u should try and sell the touchscreen on here, you get less on ebay, and get charged for ebay fees, u make even LESS. how much u want for that lilliput system? how long is it used for? used tvs go for little cuz many go bad once their used for awhile

 

Funny you mention that they go bad. The remote sensor in the TV is dead, and there is no on/off button (channel up turns it on, but there's no "off" feature unless you call pulling the fuse a "feature")

I thought it was the remote, so Lilliput sent me a new one for $5 but that didn't solve the problem.

I don't care what I get, you know. I was HAPPY with $100 shipped for my header because it was cracked. I got $145 shipped for my TYCs (which is MORE than what I paid!!). The touchscreen should fetch $200-250ish because I've got 2 remotes for it and the original box and all the manuals and etc.

Oh, I have my black housing TYCs if you would want those, but I'm looking for about $120+ (+ outrageous shipping) and I KNOW I can get that on eBay.