I tried to use the search button but it never returned any data, like I had lost my internet connection or something.

Anyways, where are the location of the things that remove the front bumper

 

1. Screws in each wheel well
2. Bolt on either side just in front of the wheel well
3. 4 or so plastic clips on the top you can see after popping the hood
4. 6-8 plastic clips on the underside, just make sure you don't go too far back and needlessly disconnect parts of the splash guards.

Then you should have it free, start by pulling one side out to the side over the splash guard in the wheel well, then you can just work your way to the other side, it'll pop off. An extra set of hands is nice so you don't let one side fall on the ground, esp the first time you do it. At least put down an old blanket etc.

 

Thanks! I'm taking my TYC projectors off sometime today if it cools down.

 

the first page of these instructions for the OEM front lip have a diagram of where everything is: http://www.handaaccessories.com/acco...frontunder.pdf

 

i know this is an old post, but...

can i just take that damn thing off, because due to shitty parking, i managed to drag the front left inner side of the splash guard down, it's not touching the floor, but when i back up or go over something i hear a scrap sound and it bothers me. it's also a visual pollution for me, so i was wondering if i can just take it off and leave it off.

 

I think you can. The splash guards are optional acessories and should come off. Remove the bumper and unscrew the splash guards. its that simple