Notices

NEED GOOD SPRINGS FOR DROP HELP<<<<

Thread Tools
 
Old Jul 6, 2005 | 03:33 PM
  #21  
MrChad's Avatar
MrChad
THE RED 6th GEN Coupe
 
Joined: Jun 2002
Posts: 1,689
Likes: 0
From: Chicagoland, IL
Default

Originally Posted by murfs66
I have a 4 cylinder...I already looked at handa and they dont have them for my car ...I read above,,,,not to lazy,,been there done that
That's great, no where above did it say V6 or I4.
Eibach's are always a good choice. But remember to get camber kit too.
Reply
Old Jul 6, 2005 | 03:43 PM
  #22  
kiddcarbuff's Avatar
kiddcarbuff
Senior Member
 
Joined: May 2005
Posts: 292
Likes: 0
Default

TEIN!!!! i have teins on my 91' rides greta. looks low, hadles great
Reply
Old Jul 6, 2005 | 05:14 PM
  #23  
murfs66's Avatar
murfs66
Thread Starter
7th Gen accord sedan
 
Joined: Jun 2005
Posts: 130
Likes: 0
From: Cali...
Default

Do I need a camber kit for a 1.5" drop? The stock camber wont align to that much?

Kidd...does the TEIN drop 1.5 " ? how is the ride ? again I'm looking for a stock compairable ride quality drop or better.... thanks
Reply
Old Jul 7, 2005 | 05:38 PM
  #24  
kiddcarbuff's Avatar
kiddcarbuff
Senior Member
 
Joined: May 2005
Posts: 292
Likes: 0
Default

the teins drop about 2.09 depending(front)and 1.69(rear)......it rides great...not rought at all however if u dont want the much of a drop go for tein's LUXURY MASTER HIGH TECH.those drop about 1.5 in the front and 1.1 in the rear
Reply
Old Jul 8, 2005 | 05:47 AM
  #25  
Vlad666's Avatar
Vlad666
Senior Member
 
Joined: Feb 2005
Posts: 111
Likes: 0
Default

I got TEIN SS coilovers. Height adjustment, damping force adjustment. Set midway soft/stiff. Handles great, ride is stiffer but still very comfortable. Actually going stiffest mode this weekend, and still sure ride will be comfortable. You can find specs on them here
TEIN
Just choose Super Street damper and find what are specs for your model. I was considering going with pillow mounts, but rear drop would have been too low for my liking.
Tha downside of TEINS is $$$$$$$$

Cheers
Reply
Old Jul 8, 2005 | 07:08 AM
  #26  
flyromeo3's Avatar
flyromeo3
 
Joined: Jan 2004
Posts: 6,692
Likes: 0
From: Bethlehem PA
Default

Originally Posted by murfs66
How about Bomz racing springs ..... ebay for 90 bucks shipped

NNNOOOO.....Those Bomz will go BBBOOOOMMMM right after.

note: you get what you pay for.

I like H&R OE springs.

.75 drop in the Front
.50 in the rear.

Still looks like my car is stock.
Reply
Old Jul 8, 2005 | 07:09 AM
  #27  
flyromeo3's Avatar
flyromeo3
 
Joined: Jan 2004
Posts: 6,692
Likes: 0
From: Bethlehem PA
Default

Originally Posted by murfs66
Do I need a camber kit for a 1.5" drop? The stock camber wont align to that much?

Kidd...does the TEIN drop 1.5 " ? how is the ride ? again I'm looking for a stock compairable ride quality drop or better.... thanks

You should be ok with camber if you lower your ride.
The front should still be in spec.
The rear might be a tad off but I dont think it will effect you.
Reply




All times are GMT -8. The time now is 06:41 PM.