I want to buy one of these lip kits but first i have some questions .
1) If it is urethane it doesnt have to be cut or trimmed or any bs like that does it like those crappy bodykits that I bought that were fiberglass .
2) Does it require drilling of any of the bumpers and how exactly does it attatch to the car .

 

I have the 96-97 one .. but the instructions are the same for both year models. (94-95, 96-97)

1. No .. no cutting.
2. No drilling. You will leave you stock front skirt on, this slides over that and attaches to your bumper via sticky double sided sticky tape. (Which is provided already on the lip). You might want to place screws were the lip wraps on the inside of the wheel well.

Hope that answers some of your questions.

 

i had to trim my front lip a bit to fit it perfectly onto the bumper. it just takes a x-acto knife or a metal file. the lips attach with 3M moulding tape and self tapping screws on the ends (in front of and behind each wheel) and underneath the rear lip

 

so would u guys recommend getting one and did u install it yourself becuase i was on ww website and it seems like anybody can really do it .

and where can i get a good deal on one