Cel
Thread Starter
mexikin who?
Joined: Jan 2003
Posts: 7,267
Likes: 0
From: mazatlan, Sinaloa MeksIK0
CEL :madfawk:
I put in a new clutch today and did a tune up now the dreaded CHECK ENGINE light has lit up. Any Idea on how to reset it?? on my generation 2 integra I would pull out a fuse under the hood for 10 seconds and it would reset.
Senior Member
Joined: Mar 2005
Posts: 356
Likes: 0
From: Bergen Cnty, NJ
Is the light constantly on or is it blinking?
IF it's solid you probably have to reset it like I did mine. Go to the fuse box under the hood. There's a 40amp fuse that says back up. Pull it and leave if out for 20 seconds then put it back and you should be set. You'll just have to reset your radio and clock.
If it's blinking you'll have to pull the code. You can go to autozone and they'll get the code for free.
Good Luck
IF it's solid you probably have to reset it like I did mine. Go to the fuse box under the hood. There's a 40amp fuse that says back up. Pull it and leave if out for 20 seconds then put it back and you should be set. You'll just have to reset your radio and clock.
If it's blinking you'll have to pull the code. You can go to autozone and they'll get the code for free.
Good Luck
Thread Starter
mexikin who?
Joined: Jan 2003
Posts: 7,267
Likes: 0
From: mazatlan, Sinaloa MeksIK0
its a solid light so Im about to go reset it now thanks :bigok:
*edit*
does the 40 amp fuse have 2 philips screws on each end that need to be removed?? because Ive been prying on them but it seems as though I have to remove these 2 screws first.
*edit*
does the 40 amp fuse have 2 philips screws on each end that need to be removed?? because Ive been prying on them but it seems as though I have to remove these 2 screws first.
Senior Member
Joined: Mar 2005
Posts: 356
Likes: 0
From: Bergen Cnty, NJ
Originally Posted by Tinker Bell
its a solid light so Im about to go reset it now thanks :bigok:
*edit*
does the 40 amp fuse have 2 philips screws on each end that need to be removed?? because Ive been prying on them but it seems as though I have to remove these 2 screws first.
*edit*
does the 40 amp fuse have 2 philips screws on each end that need to be removed?? because Ive been prying on them but it seems as though I have to remove these 2 screws first.
Thread Starter
mexikin who?
Joined: Jan 2003
Posts: 7,267
Likes: 0
From: mazatlan, Sinaloa MeksIK0
hey guys this is rayo's girlfriend and i just wanted some help here. i want to do the reseting since he's not here right now and i want to show him that girls can do this job also. So can i please get some help on how to reset the dumb check ingine light...
Senior Member
Joined: Mar 2005
Posts: 356
Likes: 0
From: Bergen Cnty, NJ
OK, here's a pic of the fuse you need to pull (in the fuse box under the hood) The fuse (marked with the yellow arrow) is for the power window motor. The fuse you need to pull is right in front of that one. It's marked with the blue arrow. On the fuse box cover, it will be labeled "back up". Pull it and leave it out for about 20 seconds.
Thread Starter
mexikin who?
Joined: Jan 2003
Posts: 7,267
Likes: 0
From: mazatlan, Sinaloa MeksIK0
I guess it might help adding the year and model of my car, its a 94 accord dx 
h:
I took out the only 2 40amp fuses under there and the bastard light still comes up :happysad:
h:I took out the only 2 40amp fuses under there and the bastard light still comes up :happysad:
Senior Member
Joined: Mar 2005
Posts: 356
Likes: 0
From: Bergen Cnty, NJ
Originally Posted by Tinker Bell
I guess it might help adding the year and model of my car, its a 94 accord dx h:
I took out the only 2 40amp fuses under there and the bastard light still comes up :happysad:
h:I took out the only 2 40amp fuses under there and the bastard light still comes up :happysad:
