Notices
Accord
Sponsored by:
Sponsored by:

neon light

Thread Tools
 
Old 03-20-2005, 11:51 PM
  #1  
azianstylez
Registered User
Thread Starter
 
azianstylez's Avatar
 
Join Date: Mar 2005
Location: Virginia
Posts: 135
Likes: 0
Received 0 Likes on 0 Posts
Default neon light

im tryna reroute the power from the neon light sticks (im talking about the small 6 inches stick for under dash) directly through the headlight switch instead of the cigarette lighter. can anybody offer any help on this??
Old 03-21-2005, 04:32 AM
  #2  
flyromeo3
 
flyromeo3's Avatar
 
Join Date: Jan 2004
Location: Bethlehem PA
Posts: 6,692
Likes: 0
Received 0 Likes on 0 Posts
Default

you will need a relay because if you connect the 12v line to it directly you might blow something. The switch doesnt provide enough juice to power up them sticks.

The relay will allow you to use the switch as a turn on lead and just use a direct 12v line from your battery to the relay.
Once you turn the switch on the relay will pass that 12v power right through.
Old 03-21-2005, 05:22 AM
  #3  
Cosmo M3
Lurker
 
Cosmo M3's Avatar
 
Join Date: Mar 2002
Location: NoVA
Posts: 3,921
Likes: 0
Received 0 Likes on 0 Posts
Default

i'm not an EE in cars, but i was thinking about maybe splicing the wires from your headlights?

Don't take my words for it since I never installed neon lights before.
Old 03-21-2005, 06:28 AM
  #4  
e3NiNe
#CustomUserTitle
 
e3NiNe's Avatar
 
Join Date: Mar 2002
Location: glass case of emotion
Posts: 63,854
Likes: 0
Received 0 Likes on 0 Posts
Default

might not be a good idea. you'll want to turn those off when you drive at night because no doubt ... it'll get annoying.

with that being said.
cut the cigarette adapeter off of the neon light
strip some of the plastic casing off of the wire
ground the solid colored wire to the body of the car
run the other wire to an inline fuse (something you can buy @ radioshack)
from the fuse, run the wire to an inline switch (something you can buy @ radioshack)
mount the switch
finally, run the wire from the switch to a constant power source in your fusebox

Attached Images
File Type: jpg
Neon.jpg (27.0 KB, 102 views)
Old 03-21-2005, 08:12 AM
  #5  
azianstylez
Registered User
Thread Starter
 
azianstylez's Avatar
 
Join Date: Mar 2005
Location: Virginia
Posts: 135
Likes: 0
Received 0 Likes on 0 Posts
Default

alright thx, imma go try
Old 03-21-2005, 10:00 AM
  #6  
e3NiNe
#CustomUserTitle
 
e3NiNe's Avatar
 
Join Date: Mar 2002
Location: glass case of emotion
Posts: 63,854
Likes: 0
Received 0 Likes on 0 Posts
Default

oops ...

"ground the solid colored wire to the body of the car"

i meant the wire with the stripe.
Old 03-22-2005, 03:38 AM
  #7  
azianstylez
Registered User
Thread Starter
 
azianstylez's Avatar
 
Join Date: Mar 2005
Location: Virginia
Posts: 135
Likes: 0
Received 0 Likes on 0 Posts
Default

well!! my friend got it to work on his prelude!! its looking good!! i might as well let him do it for me




All times are GMT -8. The time now is 04:17 AM.