Engine and Tranny Swap Trouble Acura CL to 99' Accord
#1
Junior Member
Thread Starter
Join Date: May 2017
Location: Landrum SC
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Engine and Tranny Swap Trouble Acura CL to 99' Accord
I bought a 99 Honda Accord V6 3.0 and the Tranny was bad and motor had over 300k Miles so I bought a swap from WHAT I THOUGHT WAS A 99' HONDA ACCORD ended being a Acura CL 3.0 V6. We dealt with all obstacles with the wiring harness so far and if I understand right there is an electrical component on the back of the tranny that doesn't match up! I NEED HELP ASAP!
#2
Senior Member
Join Date: Dec 2004
Location: San Jose, CA
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
#4
Senior Member
Join Date: Dec 2004
Location: San Jose, CA
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
Contact them.
Tell them what you have that differs from original equipment in the car.
Sent pictures to them.
Maybe, they can do a custom wiring harness patch or tell you what will work.
Take care,
ChrisS
Tell them what you have that differs from original equipment in the car.
Sent pictures to them.
Maybe, they can do a custom wiring harness patch or tell you what will work.
Take care,
ChrisS