F18b engine.
Someone please tell me they have heard of this engine, its the little brother of the f22.im guessing maybe they only supplied it to euro spec accords.any info on turbo kits or if a turbo kit for an f22 engine will fit.please let me know of anything relevant.if ppl know of other performance parts please reply.
Originally Posted by johnpmcmullen
Someone please tell me they have heard of this engine, its the little brother of the f22.im guessing maybe they only supplied it to euro spec accords.any info on turbo kits or if a turbo kit for an f22 engine will fit.please let me know of anything relevant.if ppl know of other performance parts please reply.
it's dohc so i dont think you'll have any luck with some of the stuff, but i dunno, that the f20b as i said.. never heard of the f18
Hi,
F18B is a SOHC and mods for it are going to cost you more... F block appears to be rare... However, to get a bit grunt and power, try with a good size, double cone air filter. Regular maintenance is a must, and use iridium plugs... Nice bore helps too... If you take out the originally supplied air filter box, you will get more than enough of space for doube cone. Make sure to create NICE FLOW of cold air. I used the secondary box, underneath. I punched a hole in it just large enough for 3' air duct. The inner pieces in this chamber i just cut of with a scraper. It was amission, but it works. Especially when cold outside. Use unleaded 95 or 98 instead of 91. Much better burning.
F18B is a SOHC and mods for it are going to cost you more... F block appears to be rare... However, to get a bit grunt and power, try with a good size, double cone air filter. Regular maintenance is a must, and use iridium plugs... Nice bore helps too... If you take out the originally supplied air filter box, you will get more than enough of space for doube cone. Make sure to create NICE FLOW of cold air. I used the secondary box, underneath. I punched a hole in it just large enough for 3' air duct. The inner pieces in this chamber i just cut of with a scraper. It was amission, but it works. Especially when cold outside. Use unleaded 95 or 98 instead of 91. Much better burning.
Last edited by Muamer; May 16, 2009 at 01:17 AM.


