'95 Accord EX

I need to replace my brake fluid. I plan to use OE fluid. I just need to know the best way to go about draining the fluid out for replacement.

Do I just go around to all four corners and bleed it all out of the lines starting at the driver's front side or what? Is there a drain to be used at the master cylinder as well?

Thanks in advance.

 

To get it all out you should bleed the brakes enough so all the old fluid is out

 

The MC reservoir is where it picks up more moisture, so suck that out with a turkey baster. (Then don't put it back in the kitchen...)

Fill with fresh fluid & bleed plenty of fluid thru each wheel, till it's fresh & clean.