Does anyone have a diagram that shows how to remove a 98 Accord bumper? I want to change the turn signals, but i don't wnat to break the bumper because i can't afford a new one.

 

you dont need to remove the bumper to change the turn signal.
Just take the clips off and pull out that cover thats in the wheel well.
Hope you dont have big hands.

 

Yep, look in the owners manual, it has a diagram.

 

The owners manual or a shop manual?

 

I'm pretty sure it's in the regular owners manual.

You can do it by taking the bumper off, but if all you are doing is replacing the bulb, then I'd just use the fender liner method. Basically turn your wheel so you have some room, remove a couple plastic clips so you can pull the fender lining back, and go in from there. Twist counterclockwise a quarter turn and pull out the socket and bulb, then twist the bulb to release from the socket.

 

lol, ur not gonna break the bumper. just a couple clips and 2 screws and you are done...but like ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ said, you dont have to take the bumper off...