Hey im actually about to start trying to put my new tails in, and i was wondering if anyone had already done this, and if there were any problems.
i messed up the wiring for my halos and had to redo the wiring already this week so it would be nice to do this right. thanx in advance,
D

 

PUTTING THE TAIL LIGHTS IN IS PIECE OF CAKE!
We put the TYC tails in my girls 01 V6 it took like 15 min.

 

thanx alot

 

Aw shit dude this is easy. At least on a Coupe, dunno about sedan. But basically you open the trunk and remove a couple of plastic "bolts" that hold the extra thick carpet stuff in. Once you're done there you can remove the corner tails with like 3 or 4 bolts holding them in. Remember to "twist" the bulbs to get them out and REMEMBER which bulb is which.

The middle piece is a tad bit trickier, It's only held by like 4 bolts, but we thought there was 5 so we kept looking for like 20 minutes making our necks hurt lol. Eventually, we figured out it was just four and used a flathead screwdriver to pry away the gasket holding the middle piece in and them whammo it popped out

WHAMMO