I purchased angel eye headlight housings for my 7th gen. accord. But i was wondering if anyone who has installed them can tell me where they wired the angel eyes so that they stay on whenever the car is on?

Thanks!

slick

 

Why not keep the stock switch on type thing?

 

Definately an option. Not sure where to hook them up even if i decide to do that. The brights and standard headlights are standard plug in, but the angel eyes are just a red and white wire.

 

Oh I get it. I think those were supposed to run off the running/driving lights. So you could just drive with those on, which is what I do anyway kinda like daytime running lights.

 

So where should i wire the red and white lights? into the regular head lights?

 

Nope. You need some more wire. You can just insert the stripped ends of the wire into the wiring harnesses for the running lights, tape and go.
When I hooked up some little fogs into the running lights I did this, carefully inserting the 2 ends of wire into the three different plug holes until the lights illuminated. Which isn't the best way to do it. Search this forum for instructions on how to do it the right way, that's my advise.

 

just splice into the wire for the driving lights.

 

besides those black plastic push pin clips under the hood, screws near the front of the fenderwell and underneath the bumper cover, are there any other fasteners in behind the wheel well liner?

I guess it would be better to ask if you have to remove the wheelwell liner to remove the headlamp?