Notices

DIY hyperblinking turn signals

Thread Tools
 
Old Oct 16, 2004 | 05:10 PM
  #1  
chops's Avatar
chops
Thread Starter
Registered User
 
Joined: Oct 2004
Posts: 11
Likes: 0
Default DIY hyperblinking turn signals

i've search about DIY hyperblinking signals, some say to cut some wires in the back lights and some say go buy it. can u guys tell more info about this shit??? i own a 4dr accord lx l4. thanx for ur reply
Reply
Old Oct 16, 2004 | 06:06 PM
  #2  
ponickka's Avatar
ponickka
Registered User
 
Joined: Sep 2004
Posts: 58
Likes: 0
From: So Cal
Default

u can do it do cheap (ghetto way) or u can buy a kit for this

the kit can run from $25-50 bucks....some are very high tech, some are just basic

as for doing it yourself, theres a module blinker under your driver dash area, its like a lil "black rectangler box) what you do need is unplug it (it is a plug n play unit) and open the box, and u must noe how to use a resistor/ solder..

goto radio shack or any electronic place and buy a resistor/ solder + a switch (turn knob perferable) and then u work from there

if u're really intereste in doing it youself, i can find u a DIY...

but honest wid the money u invest by buyin the solder/switch/ and resistor, u mite as well save some time and just buy a plug n play hyperblinker.. (just my .02)
Reply
Old Oct 16, 2004 | 06:29 PM
  #3  
98CoupeV6's Avatar
98CoupeV6
lots and lots of fail
 
Joined: Dec 1999
Posts: 23,004
Likes: 1
From: Deeeeeeeeeeeeeeetroit
Default

Reply
Old Oct 16, 2004 | 07:41 PM
  #4  
chops's Avatar
chops
Thread Starter
Registered User
 
Joined: Oct 2004
Posts: 11
Likes: 0
Default

yea that would help if u could find me a DIY. If i can do it myself then i'll do it don't want to wast money on that shit. i got a solder but not sure about the switch and resistor
Reply
Old Oct 16, 2004 | 08:04 PM
  #5  
kiet's Avatar
kiet
02 silvaccord V6 coupe
 
Joined: Oct 2004
Posts: 96
Likes: 0
From: Socal
Default

http://www.v6performance.net/forums/...ighlight=blink
Reply
Old Oct 16, 2004 | 08:05 PM
  #6  
ponickka's Avatar
ponickka
Registered User
 
Joined: Sep 2004
Posts: 58
Likes: 0
From: So Cal
Default

this link is for a civic ..but its the same procedure, just look for the black "rectangular box" under your dash (location is most likely different)

http://www.7thgencivic.com/forums/sh...d.php?t=155305
Reply
Old Oct 16, 2004 | 08:35 PM
  #7  
chops's Avatar
chops
Thread Starter
Registered User
 
Joined: Oct 2004
Posts: 11
Likes: 0
Default

well thats the site i went to that told me to cut the wires, is there anything else u can give to me so i can do it myself???
Reply
Old Oct 16, 2004 | 09:06 PM
  #8  
kiet's Avatar
kiet
02 silvaccord V6 coupe
 
Joined: Oct 2004
Posts: 96
Likes: 0
From: Socal
Default

you can buy one of those mods that you dont have to cut anything... you just replace it with one of those relays you can buy at autozone or ebay and it plugs down above the pedal area....
Reply
Old Oct 16, 2004 | 10:21 PM
  #9  
chops's Avatar
chops
Thread Starter
Registered User
 
Joined: Oct 2004
Posts: 11
Likes: 0
Default

ok thanx
Reply
Old Oct 16, 2004 | 11:05 PM
  #10  
kiet's Avatar
kiet
02 silvaccord V6 coupe
 
Joined: Oct 2004
Posts: 96
Likes: 0
From: Socal
Default

no problem... i have the mine fixed so that it is more brighter than stock and blinks on and off... My friends says they are like fogs, and i believe him when he says cuz they can blind you...
Reply



All times are GMT -8. The time now is 04:50 AM.