Notices

Chop Suie 3pt strut bar**review**

Thread Tools
 
Old Jul 18, 2004 | 12:04 PM
  #1  
VRGNCD5's Avatar
VRGNCD5
Thread Starter
cause it's tight!
 
Joined: Jun 2002
Posts: 8,044
Likes: 0
From: 916
Default Chop Suie 3pt strut bar**review**

You guys have all seen the strut bar Alan (accordhybrid) has manufactured for the 5th gen Accords and I got mine installed today. I've only taken it out for a hard drive once but so far so good. I had a Neuspeed 4pt bar on before this one so the difference between the two isn't very noticeable just yet, but once I get to drive around on familiar roads where I know how my car is supposed to handle then I can get a better feel for it.

The installation isn't too difficult, it is a bit more involved than the Neuspeed since there are a few holes you have to drill into the firewall, but for those who are mechanically inclined, it's nothing. It looks awesome, fits snug and hopefully will make my boat handle a bit better than before. I will update this again after a week or so while I get a feel for it and test it out some more.

Props to accordhybrid for making the pimpin' bar, I'll holla!

Check the pics!!

Reply
Old Jul 18, 2004 | 12:26 PM
  #2  
vtecaccord01's Avatar
vtecaccord01
Performance isn't $$$
 
Joined: Jun 2002
Posts: 1,260
Likes: 0
From: Then I would have to kill you!
Default

Nice install. My only question is How does it clear an H22 being in the engine bay of an accord?? Oh on congrats man on the move and you know what I mean. I glad things are working out for you and your son.
Reply
Old Jul 18, 2004 | 12:52 PM
  #3  
apexivtecaccord's Avatar
apexivtecaccord
ITZJDM
 
Joined: Apr 2004
Posts: 312
Likes: 0
From: Portland, OR
Default

yeah does it have enough clearence for the h22 if so let me know how much they are and how to bolt them to the firewall
Reply
Old Jul 18, 2004 | 06:05 PM
  #4  
wedley2's Avatar
wedley2
bboy Wesley West
 
Joined: Oct 2003
Posts: 15,390
Likes: 0
From: six-five-o
Default

i want one for a 4th gen.
Reply
Old Jul 18, 2004 | 06:50 PM
  #5  
92lx
Guest
 
Posts: n/a
Default

3rd point always makes for a more productive attempt to reinforce the frame. It looks a lot better than I thought it was going to when he started producing them. good stuff.

- Nathan
Reply
Old Jul 18, 2004 | 07:04 PM
  #6  
Intrepid241's Avatar
Intrepid241
Senior Member
 
Joined: Jun 2003
Posts: 1,076
Likes: 0
From: Ann Arbor, MI
Default

very cool
Reply
Old Jul 19, 2004 | 08:23 AM
  #7  
lil_1_2002's Avatar
lil_1_2002
Senior Member
 
Joined: Dec 2002
Posts: 13,574
Likes: 0
From: cali, bay area
Default

Originally Posted by VRGNCD5

IS that alan's Ugly ass toe on your battery?
Reply
Old Jul 19, 2004 | 02:06 PM
  #8  
accordhybrid's Avatar
accordhybrid
Senior Member
 
Joined: Oct 2002
Posts: 1,240
Likes: 0
From: UC, Ca
Default

Yes the bar does fit the H22. They are bolted to the firewall using 4 bolts. 2 of the bolts hold a supporting bracket behind the firewall and the other 2 go through the strut bar and through the firewall and thread into the bracket behind the firewall.

accordhybrid
Reply
Old Jul 21, 2004 | 04:39 PM
  #9  
VRGNCD5's Avatar
VRGNCD5
Thread Starter
cause it's tight!
 
Joined: Jun 2002
Posts: 8,044
Likes: 0
From: 916
Default

Originally Posted by lil_1_2002
IS that alan's Ugly ass toe on your battery?
:rofl:

Yep, that's Alan's overgrown bunion. That fool thought he was on a damn jungle gym climbin' all over my car and ish.
Reply
Old Jul 21, 2004 | 04:43 PM
  #10  
VRGNCD5's Avatar
VRGNCD5
Thread Starter
cause it's tight!
 
Joined: Jun 2002
Posts: 8,044
Likes: 0
From: 916
Default

Originally Posted by vtecaccord01
Nice install. My only question is How does it clear an H22 being in the engine bay of an accord?? Oh on congrats man on the move and you know what I mean. I glad things are working out for you and your son.
It clears w/no problem. Alan has one on his car and he's got the H double:thumbup:

Thanks man, things are good so far. Yo, pm me w/your phone number so I can holla. Late.
Reply



All times are GMT -8. The time now is 08:19 AM.