noob with dumb ????
Originally Posted by wedley2
NO!, shave the embelms! h22 swap=2500 complete
turbo=custom kit 3k? and lots of time. stock internals can handle 15psi wit good fuel system.
https://www.honda-acura.net/forums/s...drag+hairdryer
thrs hella diy's out thr in which i can provide you with some if needed.
turbo=custom kit 3k? and lots of time. stock internals can handle 15psi wit good fuel system.
https://www.honda-acura.net/forums/s...drag+hairdryer
thrs hella diy's out thr in which i can provide you with some if needed.
where can iget a h22 swap for 2500?
Originally Posted by 93accord4door
where can iget a h22 swap for 2500?
I seen em for 1900 for the ecu engine and tranny. Figuire another g for install unless you are able.
Originally Posted by swede
Any suggestions for suspension?
What's the minimum I should have? (It's lowered already)
What's the minimum I should have? (It's lowered already)
Strut bars, sway bars, good adjustable shocks and you should be set. Maybe a camber kit depending on how low you are.
Originally Posted by atlaccordguy
Strut bars, sway bars, good adjustable shocks and you should be set. Maybe a camber kit depending on how low you are.
Best bang for the buck will be suspension mods.
Originally Posted by flyromeo3
I love how people buy cars just for the name without knowing the potential it has.
swede- once you go H22 you will not go back.
swede- once you go H22 you will not go back.
Werd, I did, I went for H22, now go back to F22b1, why? The block crap out on me and it's time for rebuild
Originally Posted by swede
Looks like time to crawl under the car and see what the hell is under there.
WARNING!
NOOB QUESTIONS AHEAD!
What's a sway bar look like?
What's a strut bar look like?
WARNING!
NOOB QUESTIONS AHEAD!
What's a sway bar look like?
What's a strut bar look like?
Strut bar - just spans the gap between one shock tower to the other. Basically a rod that helps stiffen the car.
Some cars come with them stock, but 96 Accords didn't.
Originally Posted by swede
Ooooooohhhhhh. I get it.
I think I need to invest in a Haynes manual and a magazine subscription before I REALLY embarrass myself.
I think I need to invest in a Haynes manual and a magazine subscription before I REALLY embarrass myself.
have fun modding, but do your homework first. i'm sure we can all admit that we've bought things we didn't want/need afterall. sometimes paying a lot and crying once is better than crying TWICE to fix a mistake. do it right the first time.


