i was wondering, i have the stock EX rims, i want to get slotted or cross-drilled rotors... biger than stock but i dont want to get them and find out that cause of my rims i cant fit them on... anyone know how big i can go or if they have doen it

 

Just get stock size. The rotors are designed to fit your application with little room for error. Just find slotted/drilled/whatevered rotors in the same size and you'll be in good shape.

 

dont bigger brakes give better heat distribution, and stopping

 

Yes but they wont fit, you need to get bigger rims. Even if they did fit, the whole conversion is very expensive and unless you are on the track then there is no reason to do it. Just buy some drilled slotted brembos, stock size.

 

if the stock EX wheels are 15" then you can fit the Wagon rotors and calipers, or use the Wagon rotors and Legend Coupe calipers (they'll just barely clear 15" rims).

 

stock size discs are the way to go

 

If you want bigger discs, you are gonna need bigger rims. They just wont fit under the stock 15's.

 

they will if you do the legend/v6 caliper swap as well.
i've done it and i'm using my stock 15" wheels

 

On the site that make them(Rotora,Brembo,AEM etc)they say you need at least 17" wheels for them to fit.

 

thanks for the tips, stock size it is