More power yaaa!!!!
Thread Starter
Wicked Kustomz, CC
Joined: Feb 2004
Posts: 212
Likes: 0
From: here
There are many ways to clean injectors. My class is going through this right now. Adidtives to your gas don't work I dont car how you did it, its like adding the little NOS bottle to your gas you arent any faster. Anyways heres what we did.
1. Unpluged the fuel pump. Harness in your truck passenger side just unplug the piggy back.
2. Unplug the fuel line to the fuel rail.
3. Next we used a guage tank, theres also different ways of doing this, one side has air compressor hook up to a guage then to a little tank that you pour the BEM fuel injector cleaner into then another valve with guage then a line to your fuel rail.
4. My cars fuel pressure with the regulator disconnected was 38 to 46 psi you want to run it at 35 no more no less so the system doesn't kick on.
5. turn the car on and let it run till it dies (fuel injector cleaner strong enough to run car and clean at the same time when car dies you know the tank is empty( not your gas tank))
6. At the same time you letting it run get the throttle body cleaner and spray directly into the intake manifold, if you spray to much at a time the car will bogg down but you do want to spray the whole bottle in.
7. After its all said and down the kit comes with a high potent gas aditives if it really works i dont know but its a lot bigger bottle than your buy at the gas station. Add that to a full tank of gas and your done.
Injectors cleaned and ready to go believe me that sh*t really works I got my kit from Poormans in my town for 27 dollars I believe you can get it at Autozone or wherever.
1. Unpluged the fuel pump. Harness in your truck passenger side just unplug the piggy back.
2. Unplug the fuel line to the fuel rail.
3. Next we used a guage tank, theres also different ways of doing this, one side has air compressor hook up to a guage then to a little tank that you pour the BEM fuel injector cleaner into then another valve with guage then a line to your fuel rail.
4. My cars fuel pressure with the regulator disconnected was 38 to 46 psi you want to run it at 35 no more no less so the system doesn't kick on.
5. turn the car on and let it run till it dies (fuel injector cleaner strong enough to run car and clean at the same time when car dies you know the tank is empty( not your gas tank))
6. At the same time you letting it run get the throttle body cleaner and spray directly into the intake manifold, if you spray to much at a time the car will bogg down but you do want to spray the whole bottle in.
7. After its all said and down the kit comes with a high potent gas aditives if it really works i dont know but its a lot bigger bottle than your buy at the gas station. Add that to a full tank of gas and your done.
Injectors cleaned and ready to go believe me that sh*t really works I got my kit from Poormans in my town for 27 dollars I believe you can get it at Autozone or wherever.
Senior Member
Joined: Apr 2003
Posts: 3,339
Likes: 1
From: new york city
Originally Posted by AccordinglyDone
There are many ways to clean injectors. My class is going through this right now. Adidtives to your gas don't work I dont car how you did it, its like adding the little NOS bottle to your gas you arent any faster. Anyways heres what we did.
1. Unpluged the fuel pump. Harness in your truck passenger side just unplug the piggy back.
2. Unplug the fuel line to the fuel rail.
3. Next we used a guage tank, theres also different ways of doing this, one side has air compressor hook up to a guage then to a little tank that you pour the BEM fuel injector cleaner into then another valve with guage then a line to your fuel rail.
4. My cars fuel pressure with the regulator disconnected was 38 to 46 psi you want to run it at 35 no more no less so the system doesn't kick on.
5. turn the car on and let it run till it dies (fuel injector cleaner strong enough to run car and clean at the same time when car dies you know the tank is empty( not your gas tank))
6. At the same time you letting it run get the throttle body cleaner and spray directly into the intake manifold, if you spray to much at a time the car will bogg down but you do want to spray the whole bottle in.
7. After its all said and down the kit comes with a high potent gas aditives if it really works i dont know but its a lot bigger bottle than your buy at the gas station. Add that to a full tank of gas and your done.
Injectors cleaned and ready to go believe me that sh*t really works I got my kit from Poormans in my town for 27 dollars I believe you can get it at Autozone or wherever.
1. Unpluged the fuel pump. Harness in your truck passenger side just unplug the piggy back.
2. Unplug the fuel line to the fuel rail.
3. Next we used a guage tank, theres also different ways of doing this, one side has air compressor hook up to a guage then to a little tank that you pour the BEM fuel injector cleaner into then another valve with guage then a line to your fuel rail.
4. My cars fuel pressure with the regulator disconnected was 38 to 46 psi you want to run it at 35 no more no less so the system doesn't kick on.
5. turn the car on and let it run till it dies (fuel injector cleaner strong enough to run car and clean at the same time when car dies you know the tank is empty( not your gas tank))
6. At the same time you letting it run get the throttle body cleaner and spray directly into the intake manifold, if you spray to much at a time the car will bogg down but you do want to spray the whole bottle in.
7. After its all said and down the kit comes with a high potent gas aditives if it really works i dont know but its a lot bigger bottle than your buy at the gas station. Add that to a full tank of gas and your done.
Injectors cleaned and ready to go believe me that sh*t really works I got my kit from Poormans in my town for 27 dollars I believe you can get it at Autozone or wherever.
Did mines here professionaly done for $41 it smell so bad. i didnt notice any difference 70k
Thread Starter
Wicked Kustomz, CC
Joined: Feb 2004
Posts: 212
Likes: 0
From: here
alot of shops just empty a big container into the gas tank and drive it a bit. I felt a big difference but thats just my super duper fast 5th gen accord oh well till nest thread peace
NWH's DIYguy
Joined: Mar 2003
Posts: 179
Likes: 0
From: Camano, WA
1. ...just unplug the piggy back.
3. Next we used a guage tank...
, theres also different ways of doing this, one side has air compressor hook up to a guage then to a little tank that you pour the BEM fuel injector cleaner into then another valve with guage then a line to your fuel rail.
Senior Member
Joined: Jun 2003
Posts: 1,076
Likes: 0
From: Ann Arbor, MI
Originally Posted by AccordinglyDone
um smart ass i know this but when i try helping out fellow HAN members. i'll post what i want when i want so dont be a butt about it because you didnt get to it first a-hole
Registered User
Joined: Dec 2003
Posts: 76
Likes: 0
From: Ashland, OR
The reason those bottles of dump in don't work that well is because all they do is trap the gunk and grime it removes from the fuel system in the injector screens. If you have never seen one those things are sooooo small. If you really want to clean your fuel system you either have to remove the injectors and clean them after you flush the system or use an actual machine. The reason machines work so well is because they cycle cleaner in and out of the fuel system actually removing buildup.
Thread
Thread Starter
Forum
Replies
Last Post
97 CIVIC EX
92+ Civic/EL & Del Sol
2
Mar 26, 2003 11:22 AM