Notices

93 Accord Keyless Entry

Thread Tools
 
Old Dec 4, 2003 | 11:31 AM
  #1  
rock2447's Avatar
rock2447
Thread Starter
Junior Member
 
Joined: Dec 2003
Posts: 2
Likes: 0
From: Pittsburgh
Default 93 Accord Keyless Entry

I'm trying to install an alarm but I can't find the wires for the lock and unlock. What am I looking for and where can I find them. HELP!
Reply
Old Dec 4, 2003 | 12:19 PM
  #2  
hype8912's Avatar
hype8912
Dr. Klaw
 
Joined: Apr 2003
Posts: 288
Likes: 0
From: Ft. Walton Beach, FL
Default

You best bet would be to probablly try to find where the wires go coming out of the lock control box. I believe its in the drivers door. You could also trace down the wires for the drivers door lock switch.
Reply
Old Dec 4, 2003 | 12:40 PM
  #3  
SumAccordGuy94's Avatar
SumAccordGuy94
Older Honda Fanatic
 
Joined: Jul 2002
Posts: 3,154
Likes: 0
From: Adirondacks of NY
Default

Remove the trim piece around the hood latch/fuse box... behind there you'll find a large group of wires... look for a small, 2 conductor BLUE connector that is taped to the harness... it may be back as far as the door jamb... but it is in that general location. Give each wire a ground real quick to figure out which one is which...
Reply
Old Dec 4, 2003 | 05:51 PM
  #4  
rock2447's Avatar
rock2447
Thread Starter
Junior Member
 
Joined: Dec 2003
Posts: 2
Likes: 0
From: Pittsburgh
Default

Is that a small 2 wire blue connector?
Reply




All times are GMT -8. The time now is 11:24 AM.