turbo project
Goldenchild
Joined: Mar 2003
Posts: 296
Likes: 0
From: Wichita, KS
Originally posted by Alaniya
What the differnce betwen H22 and F22 pistons and rods?
What the differnce betwen H22 and F22 pistons and rods?
Registered User
Joined: Jun 2003
Posts: 48
Likes: 0
MrBrace,
You run 12 psi on ur F-max kit? Jesus, what kinda numbers are you getting with that setup? Do you have anything else done besides the kit?
See, I have the F-max kit too (alot of things i replaced tho for better parts) on my F23 and they said max boost pressure is 8 psi. Now, i know they want to give you a safe number but 8 vs 12 is a big difference.
How long have you been on 12 psi cause I would like to know how tough these F engines really are so I can maybe up the boost. I'm making 246 HP 238 TQ on 6 psi and I am getting new injectors(old 440's dont have enough juice for 8 psi) so I can tune it for 8 psi.
You run 12 psi on ur F-max kit? Jesus, what kinda numbers are you getting with that setup? Do you have anything else done besides the kit?
See, I have the F-max kit too (alot of things i replaced tho for better parts) on my F23 and they said max boost pressure is 8 psi. Now, i know they want to give you a safe number but 8 vs 12 is a big difference.
How long have you been on 12 psi cause I would like to know how tough these F engines really are so I can maybe up the boost. I'm making 246 HP 238 TQ on 6 psi and I am getting new injectors(old 440's dont have enough juice for 8 psi) so I can tune it for 8 psi.
Im So JDM
Joined: Dec 2002
Posts: 3,724
Likes: 0
From: Portland Oregon
Originally posted by mrbrace
not to sure about that one...maybe someone else could tell you but I haven't been around the H22 for very long that is why my knowledge is limited when it comes to that engine
not to sure about that one...maybe someone else could tell you but I haven't been around the H22 for very long that is why my knowledge is limited when it comes to that engine
I also find it very hard to beileve your running 12 pounds of boost on your stock motor.If you want to build up your F22 go to www.raceeng.com and buy the pistons and darton sleeve kit.
http://www.honda-performance.com/pro...&productID=189
They sell camshafts, and valves,retainers and everything you need for your head.
Good luck!
Registered User
Joined: Jun 2003
Posts: 48
Likes: 0
jschmid Here are some pics. Sorry bout the bad engine pics...disposables suk!
T3/T4 Turbonetics
Custom 3" Turbo - back Exhaust
Aquamist Water Injection
Spearco Intercooler
Walbro High Press Fuel Pump
Mf2 Injector Controller
Deltagate Wastegate
HKS SSQV BOV
T3/T4 Turbonetics
Custom 3" Turbo - back Exhaust
Aquamist Water Injection
Spearco Intercooler
Walbro High Press Fuel Pump
Mf2 Injector Controller
Deltagate Wastegate
HKS SSQV BOV
Senior Member
Joined: Mar 2002
Posts: 252
Likes: 0
From: bay area, ca
Originally posted by 96JdmAccord
Are you really running a turbo kit? Your info says nothing about it and you say you have a intake on there? I also find it very hard to beileve your running 12 pounds of boost on your stock motor.
Are you really running a turbo kit? Your info says nothing about it and you say you have a intake on there?
I also find it very hard to beileve your running 12 pounds of boost on your stock motor.