Relocated Fuel Filter
10-30-2003, 09:37 PM
#2
Senior Member
Join Date: May 2002
Location: SoCal
Posts: 1,073
Likes: 0
Received 0 Likes
on
0 Posts
10-31-2003, 04:47 PM
#4
Older Honda Fanatic
Thread Starter
Join Date: Jul 2002
Location: Adirondacks of NY
Posts: 3,154
Likes: 0
Received 0 Likes
on
0 Posts
I'm going to be running a new gas line from the bracket on the frame at the tank, to the fuel rail (of course with a filter in there). Going to have a rubber line made with high pressure fittings at each end. I want to mount the new filter on the firewall so I can actually change it.
I guess what I really need to know is, what is the actual size of the stock line? Where'd you get your parts? I see Jegs has a lot of different filters. I'm probably going to use 3/8" rubber line.
I guess what I really need to know is, what is the actual size of the stock line? Where'd you get your parts? I see Jegs has a lot of different filters. I'm probably going to use 3/8" rubber line.
10-31-2003, 09:05 PM
#5
Senior Member
Join Date: Oct 2002
Location: UC, Ca
Posts: 1,240
Likes: 0
Received 0 Likes
on
0 Posts
Well being as i just used a compression fitting on the stock fuel line the stock fuel hard line is 5/16 outer diameter and the fittings that i used were -6 an fittings.
Accordhybrid
Accordhybrid