When I turn the corner I hear a clicking sound on the driver side. I know its not the cv joint because I got that replaced like 4 months ago. I was thinking maybe it is the upper control arm.

My theory to this is because I was installing my front camber and when I got done I put my wheel back on and as I was lowering my car the jack broke and my car just droped and I didnt have my camber kit adjusted yet so when it droped my upper control arm hit my fender instead of tucking in the fender because the camber kit was adjusted to far out. could that have caused my upper control arm to click.

 

Check your axle, mine went from clicking on right turns/to clicking on all turns/to clicking louder on all turns and driving straight/ to torn boot.

 

CV may have gone again.....the other thing is you may want to make sure everything is torqued down again, and make sure everything is "in place". I know with lowering springs, a lot of people complain of hearing "knocking" for a little while....but after a little driving, a little torque, and a little more, it usually goes away.

- Nathan

 

can the upper control arm click?