Notices

help me out with my signals

Thread Tools
 
Old Oct 16, 2003 | 01:28 PM
  #1  
nizmugen's Avatar
nizmugen
Thread Starter
Senior Member
 
Joined: Jun 2002
Posts: 1,053
Likes: 0
From: San Diego, CA
Default help me out with my signals

took a road trip this past weekend and my signals crapped out on me.

i replaced the hazard fuse in the fuse box and the hazards work now but the signals still don't work.

its not the bulbs because i don't even see the green arrows light up.

help?
Reply
Old Oct 16, 2003 | 02:36 PM
  #2  
EliteAccord's Avatar
EliteAccord
Banned
 
Joined: Mar 2002
Posts: 6,193
Likes: 0
Default

There is a turn signal fuse by your legs as well check that. I had this problem before, Hazard and turn signal fuse is two seperate items.
Reply
Old Oct 16, 2003 | 10:11 PM
  #3  
DownLowAcc's Avatar
DownLowAcc
Keepin it Simple
 
Joined: Aug 2002
Posts: 437
Likes: 0
From: Washington
Default

prob has something to do with the hazard cause when I took my dash apart and forgot to connect the hazard plug back in I would turn on the turn signaler but I coulndnt see the green signal in the dash or the outside ones didnt work. could be that...?
Reply
Old Oct 16, 2003 | 10:21 PM
  #4  
AccordManiac's Avatar
AccordManiac
Korean Member
 
Joined: Aug 2002
Posts: 453
Likes: 0
From: Seoul, Korea
Default

Yup... I had same problem..
You must connect hazard in order to make turn signal work!!
Reply
Old Oct 16, 2003 | 11:29 PM
  #5  
nizmugen's Avatar
nizmugen
Thread Starter
Senior Member
 
Joined: Jun 2002
Posts: 1,053
Likes: 0
From: San Diego, CA
Default

naw its the fuse
Reply
Old Oct 23, 2003 | 12:58 PM
  #6  
egypnoy's Avatar
egypnoy
Junior Member
 
Joined: Jul 2003
Posts: 4
Likes: 0
From: Cali 909
Default

i have the same problem only I checked in fuses in the cabin by the footrest and all are good, hazard fuse was blown under the hood, replaced it and turn signals still dont work, hazards work fine. Honda said it could be the switch itself, I asked if there was a relay for the turn signals but honda said if that goes out the hazards should not be working. if anyone knows what to do please help. Thanks
Reply
Old Oct 23, 2003 | 01:15 PM
  #7  
EliteAccord's Avatar
EliteAccord
Banned
 
Joined: Mar 2002
Posts: 6,193
Likes: 0
Default

Originally posted by nizmugen
naw its the fuse
:thumbup:
Reply
Old Oct 23, 2003 | 01:38 PM
  #8  
egypnoy's Avatar
egypnoy
Junior Member
 
Joined: Jul 2003
Posts: 4
Likes: 0
From: Cali 909
Default

just double checked all the fuses and they are good, did physical check and circuit tester check. also removed and replugged relay (black box where turn signal clicking comes from) still nothing, hazards go out when i unplug and comes right back on when i replug the relay.
Reply
Old Oct 24, 2003 | 03:31 PM
  #9  
egypnoy's Avatar
egypnoy
Junior Member
 
Joined: Jul 2003
Posts: 4
Likes: 0
From: Cali 909
Default

Just checked all fuses again, I even changed every single fuse with a fresh one one at a time and still nothing. I went to Napa and bought a new flasher, still nothing. so I think the only thing left is the switch. Bulbs work because all six lights go off with my hazards. Please help. thanks for the help so far.
Reply




All times are GMT -8. The time now is 06:01 AM.