Just thought that some of you migh be interested in my new products as i know that alot of upper control arms on the EF serie are worn out by time..

the rubber gets all burn out and fatigue..
you then loose camber control even more, and u get shitt driver feeling on the steering
hehe


so what about completly solid bushings?
spherical bearings are nice, but expensive and hard to install

( must solder into control arm ..when ball joint is done u need to start over )

Also when lowerin a car, with stocl rubber bushings
you need to "reset" the bushings position because the sleeves were tighten at a specific angle

not lot of people know about that....
first it makes the car feel wrong becasue the bsuhings are at their limit of working range
then they worn out alot faster ( usually within months if already old)


our alternative is a solid, self lubricated bushing, that performs like a spherical bearin, without the installation and maintenance required ..

it installs similar to a poly bushing but it outperforms by controlling perfectly suspension movements on only 1 axis!

u get less unwanted suspension movements on starts, better camber control ( usually gain 0.5 degree approx)
resulting in less tire wear
better feeling of driver
quicker response of the car


neway please have a look at our website:

http://www.orijinmotorsports.com

i wanted to start this thread to let members know that we are working our ass to deliver top quality products that aren't avaible anywhere else, at a reasonnable price

i would like to start a discussion ( and not a sale thread)
on my solid bushings..
if you have any comments, ideasor questions please ask them here or in our sponsor forum!
( but keep this thread CRX/EF/CIVIC oriented please! )

thanks for your interest !