go to home depot and pick up some 5lb-double sided stick mounting tape. it's made by 3M. anyway, you can use that to mount your neon bars so you won't have to drill it into your car. one of my neons are drilled into the car, but that's only because it's in a place where it's all carpeting and nowhere to tie to (the one behind the seat).

now if you want to put your neon bar at the top, or if you want to put your neon bar inside with your seat down (or to light up the footwells), that's up to you...heck, you can put black stickers over the bar and tint it, so it's a big piece of black when it's off and when it turns on it says whatever you want it to say...




to wire it in, you should use a fuse connected to the battery and/or to the ignition. that way it only turns on when your key is in. otherwise, just use a switch, or include a switch into that setup. mine is battery>fuse>ignition>switch so that way it all works in. and sorry, but dont ask me about the location of the ignition wire because i don't have any pictures of it.