Originally posted by alllooksnnogo
Oh ya so I called my engine dealer and he said all that was needed to do the swap will come with it. Do you think that this means all the mounts needed as well???
Ya all the stuff for the motor will come. ECU, axles, shift linkage, and motor mounts.
However what they are not telling you is that the mounts that come with a gsr will no fit into your car. You need different ones, in your case the SI motor mounts. Normally they cut or remove all the hoses/wiring. So this sometimes can be annoying seeing your stock power steeering hose will not fit on a gsr pump (Have this problem myself). ALso the hose from your radiator will not fit. All the other hoes should work though. Since it is a jdm motor I am assuming the wiring harness will not fit either.... however they don't usually send that anyways and its alot easier to use your stock one. The only mod you will have to do is wire up the IAB cause only gsr motors have that. Again I'm assuming you have a 99-00 ex. You wil aready have the vtec wired and the knock sensor. I can give you the part number for the hose you can use that will fit perfectly from your motor to the radiator if you'd like... just don't ahve it on my now. Let me know.
PS. What year motor are you swapping into what year car/model??