Originally posted by zidek_accord
alright. i just tested one LED and i know the polaity of it and it works. now the main problem is figuring out which wires run power and which is the ground. once i get those wires i think things will start to roll. i thought the green w/ yellow wire was the power and the black is the ground but when i tap those wires and try to signal, it doesn't work. do you know which wires do what?
bust out a voltage tester. if u hook it up correctly it'll read a positive number, if u hook it up wrong it'll give u the exact same number but negative. I believe the long prong on the led is the positive while the short prong is negative.