Originally posted by KRA
the brackets are on the back of the horns so you cant see them. i had a local shop that i go to install them. they arent an ID dealer.
There's your problem...should have found a dealer...Horns years ago were mounted in that fashion where the horn is connected to the front edge of the dash.
you can trim the actual horn? ive heard they cant be trimmed from some.
If you want to, you can trim the horn all the way to the opening. That whole flat area that extends from the mouth can be trimmed as appropriate to accomodate the contours of the car.
I highlighted that section in red on the attached image. You can trim that out as necessary to get the horns as far back and to the outside of the car as possible.
It looks like you need to trim those plastic kickpanels, trim the horn bodies, and get them pushed further toward the firewall. Pushing them further back will help your stage a bit, but at a minimum, you should work to level out the passenger side.