View Single Post
Old Jun 22, 2003 | 02:05 PM
  #4  
VRGNCD5's Avatar
VRGNCD5
cause it's tight!
 
Joined: Jun 2002
Posts: 8,044
Likes: 0
From: 916
Default Re: 94 Accord Receiver Install

Originally posted by GorayOMD
Bear with me, this is my first car stereo install.

So I'm installing a Sony CDX-MP40 into the 94 Accord. I have all the wires coming from the sony unit to the wire harness that I bought. I did not solder, cuz I was just testing it. I have the ground coming from the Sony unit to a piece of metal. I turn the key it comes on. The unit is not working properly so I go to reset it. I try again and it powers up, works properly, but I do not have the antennae properly placed to test the tuner. I go back to plug the antennae int he back of the Sony Unit and it does not power up at all.

After several attempts, I try to redo the connections, still doesnt work. I notice that the clock does light up either. I go to check the fuse box. I dunno if you guys are familar, but I check the 18th slot and it happens to be blown out. I go to replace it and try the Sony unit again and it still doesnt work.

Anybody have any ideas? Could it be a electrical malfunction? Is it a costly thing to fix? Couldit be the Sony unit? Any suggestions?
check the back up fuse under the hood, I think it's labled "back up/radio" but in any case, check the fuses under the hood, I'd be willing to bet that's the cause of your problem.
Reply