Bump stop removal?
Thread Starter
Senior Member
Joined: Sep 2002
Posts: 157
Likes: 0
From: Ft. Lauderdale
Bump stop removal?
I need to get the bump stops off my stock shocks to put on my AGX's. There seems to be a welded washer that keeps the bump stop from coming off. Do I need to cut it off? Any feed back would be great.
it's my D in a B
Joined: Aug 2001
Posts: 24,787
Likes: 1
From: Your Mom's House
Originally posted by agent87
If it's the thick washer I think you're talking about, it's not welded to the piston. You just need to give it a good whack to knock it off. Good luck.
If it's the thick washer I think you're talking about, it's not welded to the piston. You just need to give it a good whack to knock it off. Good luck.
Registered User
Joined: Aug 2003
Posts: 92
Likes: 0
From: Nebraska
Like they said, it is tapered so it is just wedged there. Just give it a tap with a hammer and it will break loose. Also, if you are going with lowering springs, you will want to cut the bump stops in half.
