Ziptech O2 Simulator.... Review..
Well I've got a 2000 Si, with a test pipe, that was obviously throwing a CEL for my 2nd o2 sensor. Well I tried that resistor/capacitor trick, and well obviously it didn't work otherwise i wouldn't be making this post. I believe it only works for OBD1 vehicles so if anyone wants it just pay for shipping and it's yours.
Well after looking at a check engine light for a few weeks I did some research and found out that the Ziptech o2 Simulator was only one that I could find that tapped into everything needed to correctly simulate the o2 sensor. TPS/RPM/O2. Well I ordered it up on Monday, and recieved it today, very prompt shipping and well packaged. Couldn't wait to install it. Took me about 30 minutes to install with all soldered connections. Very detailed instructions. I had a question and it was answered withing a few hours through email. Excellent customer service. I had a great experience, so I thought I might as well let everyone else know. |
So it works well then?
|
yep, no CEL, alllll good ;]
|
Re: Ziptech O2 Simulator.... Review..
Originally posted by BrandonClaps Well I've got a 2000 Si, with a test pipe, that was obviously throwing a CEL for my 2nd o2 sensor. Well I tried that resistor/capacitor trick, and well obviously it didn't work otherwise i wouldn't be making this post. I believe it only works for OBD1 vehicles so if anyone wants it just pay for shipping and it's yours. Well after looking at a check engine light for a few weeks I did some research and found out that the Ziptech o2 Simulator was only one that I could find that tapped into everything needed to correctly simulate the o2 sensor. TPS/RPM/O2. Well I ordered it up on Monday, and recieved it today, very prompt shipping and well packaged. Couldn't wait to install it. Took me about 30 minutes to install with all soldered connections. Very detailed instructions. I had a question and it was answered withing a few hours through email. Excellent customer service. I had a great experience, so I thought I might as well let everyone else know. |
Re: Ziptech O2 Simulator.... Review..
Originally posted by BrandonClaps Well I tried that resistor/capacitor trick, and well obviously it didn't work otherwise i wouldn't be making this post. I believe it only works for OBD1 vehicles so if anyone wants it just pay for shipping and it's yours. I'll admit the o2 simulator is a lot easier to install, I'm just a cheap bastard, and I'm not ashamed of shopping at Radio Shack. :D Glad you got it worked out. |
i believe there are 2 different obd2's.. the resistor/capacitor trick did NOT work on my vehicle.
ECGPerformanceElectronics@hotmail.com |
what is the website link for the Ziptech O2 Sim. I need one.
|
email him above.
|
yep i need one too, my car runs so crappy on limp mode with my test pipe. I'm getting pretty sick of resetting my ecu every couple of days. The preludes have an obd workaround, it just clears the code everytime you turn the car off.
|
All times are GMT -8. The time now is 08:47 PM. |
© 2024 MH Sub I, LLC dba Internet Brands